UNSOLVED

Bobsharon

updated

22 years ago

B

Bobsharon

18 Posts

0

5213

April 9th, 2005 05:00

M782 Monitor goes blank intermittently

My monitor goes blank for 1 or 2 seconds and then comes back on intermittently.
 
I have read about this same symptom on the Community Forum by another user, who received a reply by another customer who downloaded the monitor driver for their model and changed the refresh rate to 60 hertz.  However, my refresh rate is already set at 60 hertz.
 
Is there any known fix for this problem?  I have ran the monitor "self test feature check" previously without any irregularity and the video card has been replaced.  Nothing has so far resolved the problem.  Any ideas?
 
  • Jesse L (retired)

    10 Wizard

    •

    17898 Posts

    •

    69016 Points

    214

    0

    Posted April 12th, 2005 17:00

    Bobsharon,

    Thank you for using the Dell Community Forum.

    Make sure the monitor is in its optimal resolution. You can also try resetting the monitor to see if that will resolve the issue.

    Click the link below to view the online manual for this monitor.

     

     

    Setting the Optimal Resolution: Dell™ M782p Color Monitor User's Guide

    For optimal monitor performance while using the Microsoft Windows operating systems, set the display resolution to 1024 x 768 pixels by performing the following steps:

    1. Click the Start button, point to Settings, and click Control Panel.
    2. Double-click the Display icon in the Control Panel window, and then click the Settings tab.
    3. In the Desktop area, move the slide bar to 1024 by 768 pixels. Then click OK.

     

    Jesse L (retired)

  • M184163

    4 Posts

    214

    0

    Posted April 29th, 2005 19:00

    Bob,

     

    I have the same problem with a Dimension 4500 and the M782.  So does my daughter.  I cannot believe Dell doesn't have a fix posted somewhere for this but I cannot find one.  I have reloaded drivers, returned the monitor to factory defaults, and shut off the power management to the monitor all to no avail.  Wish I knew.

  • Bobsharon

    18 Posts

    214

    0

    Posted July 17th, 2005 15:00

    After all this time, I finally appear to have resolved this issue.  With the advice of a savvy support person, I reset the refresh rate to 85Mhz and the blackouts have never occurred again!