.I just received a new Dell U3011. I switched the mode to Custom Color and the screen only showed blue colors. Further online research has shown this is an issue with the monitor. I tried switching to different modes (Adobe RGB, sRGB, Standard etc) then back to Custom Color and it still showing only blue colors. I then turned the monitor off but that didnt resolve the issue.
I searched the forums and I couldn't find any mention of this issue. I would like to use the Custom setting to calibrate my monitor for use with photo editing. Hopefully this is just a firmware issue.
I've only tried the DisplayPort. It seems like it's an intermittent problem and it does not occur all the time. I've had it happen twice already and the only thing that makes it go away is completely yanking the power cord out of the back of the monitor. I've tried a different DisplayPort cable and that doesn't seem to clear the issue. I've used this same port with no problems with other monitors.
I also noticed something else. I had the computer off for several hours. Prior to shutting it off I was using the Standard preset. I turned the computer back on and the screen came up fine. I then tried to switch to the Custom Preset and the screen just came up black. I tried all the other presets and the picture appeared. The only way I was able to get the Custom preset to display a picture was to remove the power cord to cycle the power. Not even turning it off from the power button would make the picture appear. This is pretty consistent with what others have experienced on different forums. The screen will either be all one color (green and blue most common) and/or completely blacked out.
I have the same problem. You can load the factory defaults ( Menu - Other Settings - Reset All settings). Now you can set the Custom Color settings again. I think it happens when you switch between the different Preset Modes and return back to the Cutom Color Settings.
I just ran into this problem myself after fixing my resolution problems. When trying to use Custom Color my screen showed basically black with small areas of color. The only fix was to reset all settings in the Factory Reset of Other settings. If this happens again, this will kind of defeat the purpose of Custom color for a color managed system.
I've reset all Factory settings (kind of defeats the purpose of having the monitor factory calibrated), but I have yet to "test" to see if I could duplicate the problem. If any of your are able to get the monitor to "act up" again after the reset please post back and I will do the same.
It also displays a totally blue or red screen in my case. So it's good for at least 3 things:emotion-4:
Hopefully we all get some resolution to this issue. Resetting to factory presets negates one selling point of this monitor, that it is fully calibrated when leaving the factory. We should be allowed to use the Custom Color Mode for our own calibration. Especially since this monitor is marketed toward professionals.
Hopefully someone from Dell will address this issue......soon
Yes, it does. You don't have to make any changes at all. When I go to Custom Settings, everything is blue/dark purple. This is at random.
I use the DVI port connected to a ASUS HD4870X2 display adapter.
To my knowledge, I thought the sRGB and Adobe RGB presets are the calibrated settings. So that leaves Custom Color as a personal setting. Am I correct?
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
2051
0
Posted January 20th, 2011 05:00
How many of the monitor ports have this issue?
DELL-Chris M (old account)
#IWork4Dell