UNSOLVED

hardcorea100

updated

20 years ago

0

7212

December 16th, 2006 20:00

Dell 2407 died

Out of the blue while I was surfing the net, my 2407 unexpectedly went blank. No picture at all, not even a no signal input. At first I thought it may have just entered a power savings mode, but with further investigation, found that was not the problem.

Unplugged the monitor, tried another one. CRT spare worked fine, so I'm thinking that rules out my computer/video card. Hooked up the 2407 again via vga, then again with dvi. Switched connections on the screen and still nothing. In fact, the monitor doesn't even say no input when there is nothing connected at all. It is like the monitor just up and died without any signs at all. It isn't hot, but I unplugged it for a day and tried it again.... still nothing.

I'm thinking it is fried, but want to rule out any other problems before I ship it back.

Thanks
  • KevinR100

    642 Posts

    148

    0

    Posted December 16th, 2006 21:00

    Try a 'self test' (in the manual), if this does not work then it must be faulty.
     
    cheers