UNSOLVED

peterallcdn

updated

21 years ago

P

peterallcdn

12 Posts

0

4944

May 9th, 2006 20:00

Can't set 1440x900 Resolution on 2405FPW

Hello all,

Just got my two new 2405FPW side-by-side monitors but I can't get the resolution I want to work. On my previous monitors I've been using 1024x768, and with these new ones I'd like to try moving up to 1440x900( I don't have great eyes 8^( ). From what I gather that would be a perfect 16:10 ratio just like the monitors themselves. But when I try to set this resolution the desktop is pretty much square with unusable black bars to the right and left. I'm using the "Aspect" setting which I believe should fit this 16:10 resolution to the monitor nicely but the desktop just won't stretch out to the right and left edges.

Things to note:
- The desktop appears "squished" from the left and right sides.
- I'm trying to set 1440x900 resolution.
- I've set the monitor to "Aspect" mode.
- I've tried reseting the moitor and using auto-adjust.
- My graphics card is a Radeon 9800 Pro

What am I doing wrong?

Thanks!
Peter
  • SR45

    2 Intern

    •

    12138 Posts

    654

    0

    Posted May 9th, 2006 22:00

    http://support.dell.com/support/edocs/monitors/2405fpw/en/optimal.htm  Optimal resolution for that monitor

    CRT’s are scalable, and you can raise or lower the resolution settings. LCD’s however, are different. Any settings lower than the native resolution results in either letter boxing, which maintains image quality by shrinking the image to a compatible size, or keeps the full screen image, but adjusts for missing pixels, sacrificing image quality.

    Screen flicker with an LCD is not an issue since the monitor does not refresh like a CRT monitor, so a refresh rate of 60 Hz should be just fine for an LCD monitor.

    A few new owners of LCD’s often find that the size of the fonts are too small for them, failing to realize that LCD’s have a native resolution for each size monitor for best viewing experience. IE : A 15 inch LCD has a native resolution of 1024x768, and a 17 / 18 / 19 inch LCD has a 1280x1024 resolution. A 20 inch LCD has a native of 1600x1200. The higher the resolution, the smaller the fonts. What you get is more information on the screen with the larger screen with the native resolution of 1280x1024 over the 1024x768 resolution. If you purchased a 17 /18 /19 inch screen, but are uncomfortable with the smaller fonts, lowering the resolution to 1024x768, as some have done, now gets you less information on the screen, wasting the extra money you paid for the larger monitor, not to mention the viewing experience will be less as well for most. Just should have gone to a 15 inch LCD instead, and saved big bucks for the same real estate. Some with bad eye sight to begin with may not notice the image quality being less than optimal by lowering the resolution, but others will.

    ClearType settings to get rid of the font jaggies : Right click an empty space on the desktop, click on Properties next, click on Appearance, than click Effects. In this box, select ClearType instead of STANDARD. Click OK, than OK again in the final box. Done

    http://ecoustics-cnet.com.com/4520-3174_7-5136369.html?part=ecoustics-cnet  Analog compared to Digital ( DVI ) article

    Message Edited by SR45 on 05-09-200607:19 PM

  • peterallcdn

    12 Posts

    654

    0

    Posted May 9th, 2006 22:00

    Well that's pretty unfortunate. Although it doesn't make total sense to me because 1440x900 is a true 16:10 ratio just like the optimal resolution of 1920x1200. You would think the monitor in Aspect mode could atleast fit this resolution to the monitor completely instead of making the desktop a square which doesn't make much sense at all as 1440x900 is anything but a square.

    Are you sure there is no way to make the 16:10 ration resolution of 1440x900 fit these 16:10 monitors??

    Thanks.
  • srvetter

    48 Posts

    654

    0

    Posted May 10th, 2006 04:00

    Have you tried FILL mode adjust on your monitor?
  • peterallcdn

    12 Posts

    654

    0

    Posted May 10th, 2006 13:00

    Hi srvetter,

    I have tried Fill mode, but Fill unfortunately makes the text look bad. I've found a program that let's you create your own screen resolutions, I'm going to see if I can create a resolution close to what I want that the monitor will accept. Although I'd still love to know why Aspect mode doesn't respect or acknowledge the 1440x900 resolution.

    Thanks
  • peterallcdn

    12 Posts

    654

    0

    Posted May 10th, 2006 21:00

    Well I'm finally happy with these new monitors. YEAH!!!!

    For the life of me I couldn't find a resolution that worked and looked good on these darn monitors all day.( Keep in mind I wanted a low resolution setting because of poor vision. I bought these more for "bigger image" than "more workspace". I was about to give up and go back to my CRTs when finally I hit 1280x768. I know that's a far cry from what the monitor is capable of but it looks good to me. There is virtually no text distortions, each letter is clear with no faded parts, a square is actually a square on screen and not stretched or squashed, lines are crisp - even 1px lines that I thought might get thicker look great. I now get the same amount of vertical pixels as I was using on my 20" CRT but now have an extra 256px width which is sooo very nice with programs that have dockers/panels like Dreamweaver, CorelDRAW, etc.

    The only downside is that when combined, there is about 1.25cm of wasted vertical space above and below the desktop because of this resolution. But I think I can live with that. When using the "Fill" setting at this resolution everything still looks great and fills up that empty vertical space. So that's great for web browsing, word-processing, etc... and then I'll just put it back to "Aspect" when it's time for me to do my web design work and squares need to be perfect squares.

    Everything else though about these 2405FPWs is awesome. The colours are so vivid, the contrast and brightness are outstanding! I was really worried about what these would look like after using CRTs for so long, but LCDs sure have come a loooong way. I love putting up cool wallpapers and just sitting back admiring how fantastic they now look.

    I really can't get over the colours. Most of the LCDs I'm used to seeing suffer from fading out, or blurriness, or pastel colours... these things literally look as good if not better than my flat screen CRTs.

    If no other issues pop up, I'm gonna be one happy camper!

    Thanks,
    Peter