UNSOLVED

cigtoxdoc

updated

17 years ago

C

cigtoxdoc

1 Rookie

•

15 Posts

0

3627

September 10th, 2009 22:00

Cannot get 2408WFP monitors to go into portrait orientation

I just took delivery of two 2408WFP monitors that I purchased specifically for their ability to do portrait orientation.  One is connected to a hp/compaq dx2200 (Intel cpu with Radeon XPRESS 200 series) and the other is connected to a hp/compaq dx2250 (AMD cpu with Radeon Xpress 1150).  Both work great with monitors at 1920 x 1200 with 32-bit color at 75 Hz..  The graphic software (ATI CATALYST control center) is set up for rotation (90 cw, 90 ccw, 180 inverted), but even using the force function will not get the display image out of horizontal orientation.  I have downloaded and installed latest graphics drivers from hp site.

What am I doing wrong?

John

 

  • cigtoxdoc

    1 Rookie

    •

    15 Posts

    304

    0

    Posted September 11th, 2009 11:00

    I am going to answer my own question.  Yes, I was doing something wrong, but what I was doing wrong was not obvious.  First, updating the video drivers on both PCs using the latest drivers available on the hp website did NOT fix the problem.  I then tried the ATI website.  I had to find the legacy section of drivers and downloads to find the correct downloads and installation instructions.  You have to download the driver and software and then remove the existing ATI software (program is buried in the ATI folder in c:\program files).  When the PC reboots it will be in 640 x 480 mode.  You then install the new drivers go to 1900 x 1200 and then do the rotation (90 degrees CCW).  New Driver Packaging Version  is 8.593.100.2-090721a-085695C-ATI for both systems.

    John

     

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    304

    0

    Posted September 14th, 2009 07:00

    Good job finding a fix.


    DELL-Chris M (old account)

    #IWork4Dell

  • cigtoxdoc

    1 Rookie

    •

    15 Posts

    304

    0

    Posted September 14th, 2009 08:00

    Hello Chris:

    Thank you for the feedback.

    John