UNSOLVED

Cparker340

updated

20 years ago

0

10508

October 28th, 2006 17:00

3007wfp goes inot shut off mode after Catalyst drivers installed!!!

Just built a new PC and the monitor works when it is in vga mode but no longer functions past the windows loading screen and goes into sleep mode. 
 
X1950xtx
  • sedated

    17 Posts

    522

    0

    Posted October 29th, 2006 09:00

    sounds like installing the driver has set the resolution and/or refresh rate to something the monitor doesn't support, or the driver didn't install properly...

    If you're running Windows XP, hit F8 when it's booting before the windows loading screen and select VGA mode... should let you boot into windows and then try setting the resolution and refresh rate to something the monitor supports and reboot again... if that doesn't work boot into VGA or safe mode again and remove the drivers and try downloading another version.

    Message Edited by sedated on 10-29-2006 05:49 AM

  • KevinR100

    642 Posts

    522

    0

    Posted October 29th, 2006 09:00

    btw. You should only have one thread about this. If possible, please delete the other thread.
    Have you tried another version of the catalyst drivers as nvidia & ati seem to be having some problems with their drivers lately? I assume that your 'power options' in XP haven't got some stupid setting?
    If this doesn't work then try to arrange an exchange.
    Try this free program when loading v/drivers after one is already installed - http://www.drivercleaner.net/professional.php
    cheers
  • 522

    0

    Posted October 30th, 2006 21:00

     I think DCC information being read off my monitor is wrong and video card doesn't support it. My 2060nx works just fine via dvi.
  • 522

    0

    Posted November 1st, 2006 15:00

    They are sneding me a replacement this week.  Thanks for the help
  • _666_

    146 Posts

    522

    0

    Posted November 26th, 2006 22:00

    Do you remember what your hardware revision was for the 3007FPW ?? (A02 etc).