UNSOLVED

sellless

updated

20 years ago

S

sellless

4 Posts

0

4612

October 29th, 2006 04:00

2407wfp - "wide mode" greyed out.... please help

Hi,

I've had my 240ywfp for a few months now and the last time I needed to changed it from 16:10 (I run it normally at 1920x1200) to 4:3 for a specific game I had no problems (***though it would be nice if it would switch automatically or via a desktop application instead of the unwieldy osd***). Today I went to do the same (switch to 4:3) and found that the "wide mode" option was greyed out and I couldn't.

If anyone can help me, I'd greatly appreciate it.
  • KevinR100

    642 Posts

    730

    0

    Posted October 29th, 2006 07:00

    You could try with the nvidia drivers but I think that you will need some luck.
    One way that I have heard of is to select 16:10 on a lower res. (which you can)
    & then switch back to (hopefully) select 1600x1200.
    If this does work please post back for other peoples benefit.
    Please note that my monitor is (shame of it all:smileysurprised:) another brand.
    cheers
  • sellless

    4 Posts

    730

    0

    Posted October 29th, 2006 07:00

    I had found a few posts with a similar problem, but none of them had any solutions for me.

    Yes, I tried it at 1600x1200. I'm running it on a 7950gx2 though, not an ati card. Is there some way I just tell the nvidia driver to simulate 1600x1200 then? Or is it only a problem in 1600x1200?

    Any help/info is appreciated.

    Thanks
  • KevinR100

    642 Posts

    730

    0

    Posted October 29th, 2006 07:00

    From what you have stated I assume that this is one of the known dell 2407 problems.
    I bet you tried to select 1600x1200 ? This more of a problem if you also have an ATI v/card.
    cheers
  • jday

    101 Posts

    730

    0

    Posted October 29th, 2006 12:00

    I'm not sure if you have tried this already or if it will solve your problem, but it works on my 2407. I am running the latest drivers from the nVidia site and in the nVidia Control Panel, I select "Display" and then "Change flat panel scaling." In the options available, I then choose "Use NVIDIA scaling with fixed-aspect ratio." I am not really a gamer, but I do play a lot of Tiger Woods 07 which is NOT a widescreen game. With this setting from the NVIDIA Control Panel, the game displays properly (4:3 mode) with black bars on the sides, but everything else on my computer displays properly in widescreen (1920 x 1200).
  • sellless

    4 Posts

    730

    0

    Posted October 29th, 2006 17:00

    Well, I feel kind of stupid now. I don't know how I overlooked that setting as I thought I'd gone through the entire control panel.

    Anyway, thanks very much. That setting was exactly what I needed. It works perfectly now and as a bonus it's automatic unlike the "wide mode" on the monitor itself.

    Thanks again :)
  • PerfectCr

    19 Posts

    730

    0

    Posted October 29th, 2006 22:00



    @jday wrote:
    I'm not sure if you have tried this already or if it will solve your problem, but it works on my 2407. I am running the latest drivers from the nVidia site and in the nVidia Control Panel, I select "Display" and then "Change flat panel scaling." In the options available, I then choose "Use NVIDIA scaling with fixed-aspect ratio."

    I am not really a gamer, but I do play a lot of Tiger Woods 07 which is NOT a widescreen game. With this setting from the NVIDIA Control Panel, the game displays properly (4:3 mode) with black bars on the sides, but everything else on my computer displays properly in widescreen (1920 x 1200).




    Actually you can run TW07 in Widescreen at the native res.. http://www.widescreengamingforum.com/forum/viewtopic.php?t=1681

    Yes the thread says 06 but it works in 07.
  • jday

    101 Posts

    730

    0

    Posted October 29th, 2006 23:00

    PerfectCr, I checked out the solution you referenced. Although I'm definitely NOT an expert at this type of thing, I downloaded a Hex editor and tried the solution. I might have done something wrong, but the result is that I didn't see any difference when I placed the game in WS.

    Even without making the changes I could have the game display in WS, but it was stretched (the golfers were fat and squatty). This was still the same after I made the hex changes. So, if the patch was simply to fill the screen, but not keep the picture in proper perspective, then it's not for me. If it can actually display the game in WS in proper proportions, then I obviously did something wrong.
  • PerfectCr

    19 Posts

    730

    0

    Posted October 29th, 2006 23:00

    Are you sure you applied the proper hex values for 1980x1200 and not 1680x1050? The downloadable file there is on for 1680x1050. You will still need to edit the fle itself to get 1980. The game does not appear to be stretched when I play it Also, did you check via the OSD what resolution you were running in?

    Message Edited by PerfectCr on 10-29-2006 08:50 PM

  • jday

    101 Posts

    730

    0

    Posted October 30th, 2006 03:00

    PerfectCr, as I stated in my last post, I am far from an expert in this type of situation (actually first time I've ever used a HEX editor). Going back to the link your provided, I noticed that in the first post, there were 4 sets of two numbers bolded (00 05 and 00 04). I assumed these were the HEX values for the resolutions. In a later post in that thread someone posted the following: "In Little Endian Hexadecimal, 1920 is 8007, and 1200 is B004."

    So I assumed that I should replace the first two bolded pairs with the "80" and "07" and the second set with "B0" and "04". If that correct?