UNSOLVED

DigitalArt

updated

19 years ago

D

DigitalArt

15 Posts

0

12432

March 11th, 2008 14:00

2407WFP in a 2407WFP-HC enclosure - very strange

I received a refurbished 2407WFP REV A04 monitor and noticed that the front bezel around the buttons is from an HC model. From reading many reviews and Dell documentation, I can tell this by looking between the (-) and (+) buttons. There is a line connecting them and there is a set of icons for the contrast and auto ajust. The non-HC model doesn't have this. So what could of happened to this LCD?

HC model documentation
http://support.dell.com/support/edocs/monitors/2407WFPH/en/ug/about.htm#Front%20View


non-HC model documentation
http://support.dell.com/support/edocs/monitors/2407WFP/en/about.htm#Front%20View
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    254

    0

    Posted March 11th, 2008 15:00

    DigitalArt,

    Please post a picture of this monitor.


    DELL-Chris M (old account)

    #IWork4Dell

  • DigitalArt

    15 Posts

    254

    0

    Posted March 11th, 2008 17:00

    Chris here are 2 images. As you can see I also enabled the service menu for the panel type and the monitor information manu.

    Large images...

    http://aycu03.webshots.com/image/46322/2005939517001225030_rs.jpg

    http://aycu05.webshots.com/image/45564/2005901459244184150_rs.jpg
    Message Edited by DigitalArt on 03-11-2008 02:03 PM
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    254

    0

    Posted March 11th, 2008 18:00

    DigitalArt,

    Thanks. I have sent this to product group.


    DELL-Chris M (old account)

    #IWork4Dell

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    254

    0

    Posted March 12th, 2008 11:00

    DigitalArt,

    What is the monitor PPID number?


    DELL-Chris M (old account)

    #IWork4Dell

  • cliuc2

    9 Posts

    254

    0

    Posted March 12th, 2008 14:00

    Dear DigitalArt:

    You are perfectly right, the bezel is for a 2407-HC from your pictures. I personally think that this had happened in Refurb Factory because 2407 and 2407-HC share control board (a small PPCB activate all buttons). So, a 2407-HC bezel will work on 2407 no HC version. I just simply image that the worker put a HC bezel to this unit when the unit was reconditioned.

    I hope this answer can help you. If you have more questions for me, you can send mail to changshou.liu@Qisda.com

     

  • DigitalArt

    15 Posts

    254

    0

    Posted March 12th, 2008 14:00

    You have a PM.