UNSOLVED

SargeZA

updated

20 years ago

S

SargeZA

18 Posts

0

4526

July 7th, 2006 06:00

2407 partial component fix

Just read this on the HardOCP forums...

http://www.hardforum.com/showthread.php?t=1064124&page=10&pp=20

POSSIBLE FIX FOR THE COMPONENT QUALITY!!!???

Sorry for the caps, but I think this warrants attention and some investigation. A user at another forum (Burger at gaming-age) has just sent me some info on how to help out the component quality quite a bit. I'll copy and paste what he wrote to me.
Quote:
Hey dude,

Was reading your impressions of the Dell 2407, as I have recently purchased one. Like you, massive problems with component video.

Until.... I disabled something called ACC which I think stands for Adaptive Colour Correction.

You have to access it from the service menu as follows:

Power off.
Hold down "menu" and "+" buttons.
Power on (keep holding "menu +" till power up done).
Wait until the connector info dissapears off screen (dvi connector/Dsub).
Press "-" button.

You now see the service menu with the panel info at the top.

Good luck!

I tried it, and it really does help quite a bit. It didn't seem to fix it all the way, but perhaps with some fiddling a real fix can be obtained. Just doing this seemed to make the picture much more natural looking. It looks much harsher than VGA, but I haven't been able to fiddle with the settings very much. This is worth exploring I think if you are planning to use the component input.
  • Dufflover

    2 Intern

    •

    429 Posts

    204

    0

    Posted July 7th, 2006 07:00



    Until.... I disabled something called ACC which I think stands for Adaptive Colour Correction.
    I thought ACC was already disabled (as part of the A00 banding fix).
     
    Guess it wasn't? (like only for DVI + VGA in Desktop mode, as opposed to Desktop mode globally)
     
  • SargeZA

    18 Posts

    204

    0

    Posted July 7th, 2006 07:00

    I'd really love it if the started putting the old Genesis controller board from the 2405 in the 2407 - at least 1080i would work properly and the component image quality would be nice. I don't really give a hoot about HDCP...
  • gpro

    2 Intern

    •

    2024 Posts

    204

    0

    Posted July 7th, 2006 07:00

    ACC/ACM (Adaptive Color and Contrast/Active Color Management)

    ACC/ACM was disabled in Desktop mode in Rev A01.

    When I use S-video input on my 2007WFP the Image modes change to Theatre Mode, Sports Mode & Nature Mode (no Desktop mode). I guess it is the same with component input on the 2407WFP.