UNSOLVED

Rowlander

updated

20 years ago

R

Rowlander

7 Posts

0

8544

October 1st, 2006 11:00

2407 HDTV modes

Hi! I´m sorry, if these questions have been answered before but I didn´t find anythin with the search function.

I´m on the fence to buying a 2407 and was wondering about it´s HDTV compatibilities.
I´m planning on using my Xbox 360 with the upcoming HD-DVD drive to watch HD-movies. The 360 will get a 1080p software update from Microsoft soon. (Or so they say, at least.)

So here is a list of simple questions about the 2407 monitor:
- Does it accept a 1080p HDTV signal via Component?
- Does it accept a 1080p HDTV signal via VGA?
- Does it accept a 1080p HDTV signal via DVI?
- Is the 1080p signal being stretched to fill the vertical 1200 resolution?
- If yes, is there a way to (manually) correct that?
- How are the chances, it will be possible to connect a Playstation 3 with an HDMI to DVI caple and use it in 1080p?

Thank you a lot in advance!
  • trabpukcip

    21 Posts

    207

    0

    Posted October 1st, 2006 14:00

    Judging by having a PC using 1920 x 1080 (ie. 1080p) there should be no strechingof the image just borders top and bottom as it should be 1600 x 1200 is the only problem resolution (can't turn off stretch).

    Component input is another matter it can apparently clip then squash the image slightly resulting in rubbish image quality.

    So VGA and DVI should be fine no matter what it is connected to for 1080p ie. BLu Ray player, upscaling DVD player, PS3, PC etc. (HDCP should not matter provided the PC graphic card has the right decoding chip or some other HDCP comliant device ie. the other stuff I mentioned).

    But component is probably going to be horrible (so don't use it).

    You could always have VGA for PC and use DVI for a HDCP compliant device and switch between them with the input button.

    Message Edited by trabpukcip on 10-01-2006 10:52 AM

  • alg7_munif

    52 Posts

    207

    0

    Posted October 1st, 2006 14:00

    I also want to add a few question about HDTV:
     
    Which resolution is supported by HDCP through DVI port?
    Why Dell doesn't give a proper product specification on HDTV resolution support for the monitor, only HDCP thruogh DVI is specified but not the resolutions?
  • all the facts

    2 Intern

    •

    983 Posts

    207

    0

    Posted October 3rd, 2006 12:00

    2407 Chip can't do 1080P unless someone confirms positivly otherwise.
    I gotta see that. 1080P down res's to 720P
  • Rowlander

    7 Posts

    207

    0

    Posted October 11th, 2006 11:00

    So, is this the final word?
    1080p does not work / scaled down to 720p?
    I guess the big question is: Can you input a 1920x1080 signal via VGA for example and set a 1:1 pixel aspect ratio, so you have small black bars on top and bottom and not have the image stretched to 1200 pixels vertical resolution?
    Has nobody tested this yet?

    Will it look like the image on the left (true aspect) or will it end up like the image on the right (false aspect)?


    The reason I am asking is, because I want to use the 2407 with an external HD-playback device like the PS3 for example.