I just received a new 2405 wide screen monitor. It appears to be too bright. I have the brightness turned all the way down. Contrast was unavailable in the AVI mode, Dell suggested using analog. Even after tinkering with contrast in analog, my 3mb jpg's appear to be under exposed due to the monitor's brightness. Can anyone help me?
I suggest trying a third party software calibration solution. I use Entech Taiwan's Powerstrip to reduce the brightness to a comfortable level on my Samsung 151P as I must keep its own brightness set for 60 to eliminate backlight buzz.
I had the same problem with my 1905FP monitor. Someone suggested that I adjust the gamma in my nVidia display card driver. That did the trick, and I now love my monitor. So, if you have an nVidia or other card with a gamma adjustment, give this a try.
BTW, I have the monitor brighness set at 25 and the gamma at 55.
You know how you can adjust the brightness of your display with the controls on the monitor? How the image's brightness changes? There's software that can do the same thing without affecting how the monitor itself is set (meaning if you're already at minimum setting on the monitor, you can get darker still by using this software); PowerStrip is one piece of such software. Even your video card may offer similar controls; the gamma adjustment is an example; it's very similar to brightness adjustment.
Some photo guy from the HardForum calibrated 2405 against his lacie crt monitor. Here is his recommeded settings:
Red:26
Green:27
Blue:30
Brightness:15
Gama:0.78
The Gama adjustment is from your video card software.
I tried it, but I still find the grey is still too pink. So I use this tool here:
Using displaycalibration.com , I can pretty well come up to pretty good results without having to buy specialized calibration tools. SO, give it a try and tell me what you can come up with your settings.
@khs8 wrote:
Some photo guy from the HardForum calibrated 2405 against his lacie crt monitor. Here is his recommended settings:
Red:26
Green:27
Blue:30
Brightness:15
Gama:0.78
The Gama adjustment is from your video card software.
I tried it, but I still find the gray is still too pink. So I use this tool here:
Using displaycalibration.com , I can pretty well come up to pretty good results without having to buy specialized calibration tools. SO, give it a try and tell me what you can come up with your settings.
-----------------------------------
Thanks for the reference. I went to displaycalibration.com and did the routine with my Radeon 9800XT and 2405FPW. I found that I was not only too bright, but had that pink cast in my grays which you mentioned. Your settings were perfect for me ... thanks for sharing.
That trick they suggest [ i.e., holding up the white sheet of paper next to the gray squares in display on the last page at the bottom of the page ]) really helped me appreciate how much of a pink cast I had at default settings. I like the monitor even more now, if possible.
Does anyone know how to adjust the video card on a mac??? I'm way too bright on
my monitor and i can't get my prints to match. I've got to send this back if i can't get it right.
Edward Ng
4 Posts
339
0
Posted May 6th, 2005 20:00
I suggest trying a third party software calibration solution. I use Entech Taiwan's Powerstrip to reduce the brightness to a comfortable level on my Samsung 151P as I must keep its own brightness set for 60 to eliminate backlight buzz.
Let me know if that helps, and good luck!
-Ed