bwentzel13

updated

12 years ago

B

bwentzel13

1 Rookie

•

33 Posts

0

42819

March 8th, 2015 10:00

XPS 13 (9343) and Samsung XP941 SSD

I am considering installing a 512GB Samsung XP941 in my Dell XPS 13 (9343) and have several questions for those of you that have already done that:

  1. What issues did you experience and what did you do to overcome them?
  2. Have you run benchmarks and if so, what performance are you seeing with this SSD?

Thanks in advance for taking the time to answer these questions.

  • dtupperjr

    3 Posts

    1540

    1

    Posted March 9th, 2015 10:00

    No issues, but I didn't do a new clean install and instead restored from a backup using recovery usb boot and then a recovery of the full system from another storage device.  By not doing a new clean install, I had to "fix" the boot record, boot into safe mode 1 time, and then reboot again. 

  • bwentzel13

    1 Rookie

    •

    33 Posts

    1540

    0

    Posted March 9th, 2015 11:00

    Thanks for the information.  It doesn't sound too problematic and you got a nice performance boost.

  • ssmakris

    1 Message

    1540

    0

    Posted May 15th, 2015 17:00

    Hello,

    What model XP941 did you buy? I bought one that has only one notch in it. The PM851 that I removed has two notches. 

  • 1540

    0

    Posted July 5th, 2015 04:00

    Hi,


    Did you find out which version of PM851is fit for xps 13 9333 ?

    Thank you

  • 1540

    0

    Posted July 26th, 2015 17:00

    You can buy one notch or two notches, both works. I just tested.

    XP941- 1 notch - tested works 100%
    www.amazon.com/gp/product/B00JOSM3TK

    850 EVO - 2 notches - tested works 100%
    www.amazon.com/gp/product/B00TGIW1XG

  • moheban79

    1 Rookie

    •

    14 Posts

    1540

    0

    Posted March 11th, 2017 07:00

    So the 9343 xps 13 is compatible with both 1 notch and 2 notch m.2 drives?

    Thanks

  • Saltgrass

    6 Operator

    •

    4328 Posts

    •

    15932 Points

    1540

    0

    Posted March 11th, 2017 08:00

    The manuals on the system never state it is compatible with PCIe systems.  If it doesn't have a Bios to support a PCIe drive, such a drive might work as SATA.  I do not own the system so I cannot test to confirm.

    From the picture in the manual it does not look like the system is set up to install a heatsink.  A PCIe drive may need one.

    PCIe drives a more expensive for the same storage.  From where I stand, it may be a better way to go to just use a SATA drive, even in one of the systems which does support PCIe NVMe but has to use the Microsoft driver..