UNSOLVED

justincredibleh

updated

20 years ago

Closed

0

3748

January 20th, 2007 23:00

Suggestions for Replacing Broken Screen

Last night one of my friends stepped on my laptop. It now appears like a broken windshield when you turn it on. It is not under warranty and I'm wondering what options I have for replacing it.
 
Any suggestions would be great.
 
Thanks,
Justin
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    242

    0

    Posted January 20th, 2007 23:00

    You have two options - a new panel (preferably of the same model as you have; if not, another from the same model notebook - cost, anywhere from $400-600+ depending on size and resolution, or a used panel of the same model.

    The used on carries the risk that you have no idea how many hours are on the backlight.

    If you get a different model panel, you will need the inverter for it as well.
  • 242

    0

    Posted January 21st, 2007 15:00

    Thanks for the suggestions. Would you recommend me replacing the screen myself, sending it in to Dell, or finding a computer business to help me out? Here is the info on my computer; what do you think I'll need to buy (I'm going to buy a new one) and how much will it cost?
     
    HD993 ASSEMBLY, CABLE, COAXIAL, LIQUID CRYSTAL DISPLAY, 15.4, 6K, Wide Extended Graphics Array
     
    ND808 LIQUID CRYSTAL DISPLAY, 15.4WXGA, VIDEO ELEC. STDS. ASSOC., SAMSUNG
     
    Y5995 BEZEL, PLASTIC, LIQUID CRYSTAL DISPLAY, 15.4, NOTEBOOK, 6000
     
    F7970 ASSEMBLY, ADAPTER, ALTERNATING CURRENT, 65W, LEAD FREE, LITEON
     
    G5845HINGE, COVER, PLASTIC, INSPIRON, 6000
     
    M4185PROCESSOR, 80536, PENTIUM M DOTHAN, Pentium M Dothan, 1.86GHZ, 2 MEGB, 533FSB, PLASTIC GRID ARRAY, C0
     
    H5639KEYBOARD, 87, UNITED STATES, ENGLAND/ENGLISH, SINGLE POINTING, SULLIVAN/TOBAGO
     
    F2951KIT, CORD, FLAT, 3F, D3W/3P, PROPOSITION 65, UNITED STATES
     
    F5132BATTERY, PRIMARY, 11.1V, 6C, LITHIUM, SONY
     
    CC753ASSEMBLY, COMPACT DISK READ WRITE/DIGITAL VIDEO DISK DRIVE COMBO, 24X, PHILIPS, SULLIVAN/TOBAGO
     
    GD296CARD (CIRCUIT), GRAPHICS, 64MB, I6000, M22, SURFACE MOUNT
     
    8267RCONNECTOR, HEADER, 2X22, FEMALE, 2, S, G, 35K, THIRD HEIGHT, CHIP SET
     
    UF414ASSEMBLY, BASE (ASSEMBLY OR GROUP), BOTTOM, DISCRETE 6000, DELL MEDIA DIRECT
     
    T8429HARD DRIVE, 60GB, 9.5, 5.4K, LEAD FREE, FUJITSU, ZEUS 60 HDD
     
    T1613KIT, SOFTWARE, OFCBSC-2K3, ORIGINAL EQUIPMENT MFGR., ENGLAND/ENGLISH
     
    UF650KIT, SOFTWARE, TREND MICRO, 12, ENGLAND/ENGLISH, DELL AMERICAS ORGANIZATION
     
    Y8029CARD (CIRCUIT), WIRELESS, MINI PCI CARD, 1370, BROADCOM CORPORATION2Y5522

    DUAL IN-LINE MEMORY MODULE, 512MB, 533, 64X64, 8K, 200

     

    Any help would be great. Thanks again.

    Justin

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    242

    0

    Posted January 21st, 2007 15:00

    The labor to install should be less than $100; the screen itself will be about $500. Unless you know how to do the job, there is a probability you will break the new screen when you install it; since you're looking at a minimum of $500 anyway, I'd have it replaced professionally unless you're sure you can do the job without breaking the panel or damaging the system.