UNSOLVED

Lonny007

updated

22 years ago

Closed

L

Lonny007

5 Posts

0

13456

March 14th, 2005 17:00

Sound Blaster Audigy 2 NX External USB or PCMCIA version

Any big differences or bugs which would make 1 or the other the better one to choose, just using it for some new games out. I take it the USB one needs a power supply and the PCMCIA does not. Oh this is for a 8600. Thanks
  • glidem

    2 Posts

    880

    0

    Posted March 15th, 2005 07:00

    I have the 8600 and the PCMCIA version. It works very well indeed and you can run from the internal battery as well.

    There are some popping issues with DVD-Audio disks and on some rare occasions in games, however these are being looked into by Creative and overall the card is fantastic.
  • Lonny007

    5 Posts

    880

    0

    Posted March 15th, 2005 22:00

    Thanks ya I get some popping with stock Sig sound card too kind of odd maybe something else then is the culprit effecting the sound cards.

                                                                           Lonny 

  • Newsy

    6 Posts

    880

    0

    Posted March 23rd, 2005 17:00

    I have the Audigy 2 ZS Notebook PCcard installed into my Inspiron 8200.

    The sound is great but whenever I burn CDs using my external Firewire burner, I have to remove the Audigy card. Otherwise there is some kind of SCSI interface error and I get coasters. I also have an external Firewire hard drive for backups and as yet, I have not seen an error. However, I will be removing the Audigy card prior to using it from this point forward.
  • 4fluke

    354 Posts

    880

    0

    Posted March 25th, 2005 14:00

    The external USB sound cards don't need a power supply:  they run off the 5 V / 500 mA supply through the USB plug. 
  • Jim Coates

    6 Operator

    •

    13582 Posts

    880

    0

    Posted April 2nd, 2005 02:00

    Fluke,

    Creative does state that no power adapter is needed for their usb Live! card, but I couldn't find a similar claim for their Audigy2NX. If you go to this page near the bottom is a pic of the rear of the unit and there seems to be a connection for a wall wart on the far right of the back panel.

    audigy2nx
    (http://www.soundblaster.com/products/Audigy2NX/welcome.asp)

    An interesting fact is that their discontinued Mp3+ card which normally did not require a power adapter, would not work on the 8600 or the XPS unless it was plugged into a powered usb port. We all thought the usb ports were underpowered but I finally found a Soundblaster faq that claimed the ports were 'timing out' before the cards could get powered up. Don't know if they got that ironed out with usb Live! or not.

    Jim
  • RobsTV

    31 Posts

    880

    0

    Posted April 2nd, 2005 13:00

    Check out the comparison page, and you will see many differences.
    PCMCIA has more modern features.
     
  • Lonny007

    5 Posts

    880

    0

    Posted April 2nd, 2005 15:00

    Right on just what I was looking! Thanks