
UNSOLVED
Closed
Several problems with my dell inspiron 8200
Hi, I've bought an dell inspiron 8200 on ebay, with the tag number : GCBJD11 (It is still under warranty, but the warranty transfer hasn't been made yet)
I got some problems with it :
- When the computer accesses to the memory, I heard a noise, comming bigger when there is lots of acces on the memory (RAM)
- When the computers goes on standy, I can't make it go back to windows, it freezes...
- When I turn off the computer I heard a little crack coming from the speakers or somewhere else...
Do you know where the problem comes from?
Thanks
Romain
Responses (7)
Solutions (0)
mnguyen281
425 Posts
340
0
Posted February 23rd, 2004 00:00
what bios are you running? update to the latest bios (a11) and that should take care of the sleep and the pop when you shut down the computer (always happens on reboot though)
03/26/02 Main System Sits in the Dock
Dell Latitude C840 BIOS A12, WindowsXP Media Center Edition, 15" Ultrasharp, P4 2.5GHz-M, 1024MB DDR, 60GB 7200rpm, 60GB 5400rpm, 40GB 5400rpm, USB2.0 Enclosure, 8X/24X Combo, 24X CDRW, 1.44MB Floppy, 66WHr Battery x 3, GeForce4 440 Go 53.03 StarStorm, 1300 802.11b/g, USB2.0 PCMCIA, IEEE 6-pin PCMCIA
01/30/04 Sits in the Corner
Inspiron 8600 BIOS A03, WindowsXP TabletPC Edition, 15.4" Ultrasharp, P-M 1.6GHz, 1024MB DDR, 60GB 7200rpm, 40GB 5400rpm, 4x DVD+R/+RW, 1.44MB Floppy, ATI Radeon 9600 Pro Turbo w/ Omega 54.14, 1300 b/g
02/02/04 Dell Auction for $511.01 - Work System
Latitude L400, XP Pro, pIIIm 700MHz, 256MB, 20GB 4200rpm
09/19/02 Old School System
Latitude X200, XP Pro, pIIIm 800MHz, 384MB, 30GB 4200, TM1150
11/15/03 New School System
Latitude X300, XP Pro, P-M 1.2GHz, 640MB, 40GB 5400, TM1300
02/03/04 Just for Kicks
Axim X3i, Windows Mobile 2003, 400MHz, 64MB ram, 64MB rom, integrated 802.11b
02/12/04 Axim X3i Redux
Axim X3i, Windows Mobile 2003, 400MHz, 64MB ram, 64MB rom, integrated 802.11b"what bios are you running? update to the latest bios (a11) and that should take care of the sleep and the pop when you shut down the computer (always happens on reboot though)"
It may help him, but I've been running A11 since it came out on my 8200 and my external speakers still pop when I shut down while docked. Haven't noticed it while undocked though. Never really worried about it and still don't.
I've flashed the bios to A11, no changes, I still hear a pop, and I plugged headphones, It comes from the speakers, and not from another part.
I've not retested the standby yet, but my computer still makes noise when accessing to memory (I tested my memory with another laptop, and there is no noise with the other laptop, so It don't comes from the memory).
When I put my computer to battery optimised mode (1.2ghz) the noise is quieter, when I put it to full performance mode (1.7ghz), the noise is louder! I am asking myself if it comes from the motherboard or the processor...
And I got another problem : I got several noises every 3-5 min from the hard disk, making a little freeze of 1 sec on the screen when using my computer (like with 3dsmax).
Any ideas?
Thanks
Romain
I don't understand what would be making noise when you access memory except software.
Regarding the hard drive, are you running Smart monitoring software or background scanning software of any kind that would be testing or otherwise accessing the drive? That sounds like something along those lines.

cazint
2 Intern
•
134 Posts
340
0
Posted February 21st, 2004 12:00
Hey Romain.
Honestly, those problems could be caused my many many different things. Almost too many possibilities to diagnose. If it were me and that was my computer, reformat and reinstall everything. heck, I would have done this anyway if I got a new computer....which is exactly what i did for my 5100 machine.
So try to do the following: immediately downlaod all the newest drivers, for all your hardware, from Dell's support site, and copy those drivers to a cd. Further, back up any information, on to cd, that you need from that computer. Then IMMEDIATELY format your hard drive, and reinstall windows. After windows is installed, install all the newest drivers that you downloaded from their site. NEXT, perform all the windows updates. DO NOT LOAD ANY OTHER PROGRAMS. Use your computer for a couple of days.
At this point, post your results. Hopefully, your issues were software related, and as such, will be solved with the reinstall. Further, you will have a much better working computer. If you are good to go, you will want to install the office suite next (assuming you have it), or whatever word processing application you may have (Microsoft Works, Lotus, etc.) The third install should always be, assuming you have it, Norton Systemworks. If you don't have this program, go invest into it. it's a great purchase. Also it can monitor the remaining installs of all your other software, which then allows for a better, fuller uninstallation of those programs if necessary. Plus it has great optimization, repairing, and cleaning options for keeping your computer up to date....and of course, the well known Norton Antivirus. Anyways, I'm just an advocate for that program. Next, install all of your remaining software and you should be fine.
If you still have problems, you can post here, or really, it would be time to call tech support, and you can inform them that it is not software related, as you did a format and clean install.
good luck.
cazint.