
UNSOLVED
Closed
A
AussieScorp
2 Posts
0
29506
July 15th, 2006 02:00
Screen Turn off, on lid Close... Inspiron 9400
I just got my Inspiron 9400, the other week, very pleased with it.
Just one thing i have noticed is that when i close the laptop lid, the screen doesn't turn off.
Is there a windows setting i'm missing, OR is something going wrong?
I would prefer to save battery life when i close the lid....
Every other laptop i have owned has turned the screen off when the lid is closed.
Any help would be greatly appriciated.
Cheers Brad
Just one thing i have noticed is that when i close the laptop lid, the screen doesn't turn off.
Is there a windows setting i'm missing, OR is something going wrong?
I would prefer to save battery life when i close the lid....
Every other laptop i have owned has turned the screen off when the lid is closed.
Any help would be greatly appriciated.
Cheers Brad
Message Edited by AussieScorp on 07-14-200610:58 PM
Responses (4)
Solutions (0)
- hey, i have an e1505 and had the same issue, my screen would not turn off when i closed the lid. this can be due to two issues that i know of...1) Check to see if the ATI Hotkeys service is turned on. with this turned off, i heard that the screen will not turn off when the lid is closed.2) This was my issue, hopefully number 1 fixed your issue. The "reed switch" may have failed. It is a small sensor under the left mouse button on your touchpad. To see if it works, try placing a semi-strong magnet there, if it turns off then your reed switch is fine. If not, then the reed switch is busted and you'll have to notify dell. They will send you a box via DHL and ship it out to a service place to get it fixed. This is what i had to do.Let me know if this helps...
Maverick3277
144 Posts
321
0
Posted July 18th, 2006 17:00
If working properly and the screen goes off when lid is closed does it enter a hibernation or standby mode and then does it simply power totally off after so much time? Can an auto timer to turn off be found in my 9300?AussieScorp
2 Posts
321
0
Posted July 18th, 2006 21:00
IF, thats IF i turn the Standy when lid shut option on in windows, it goes into stanby, same with hibernation, so i'm pretty sure the Sensor is fine...
I'm going to try the Software when i get home.... (I did do a windows rebuild, and didn't put alot of Dells stuff on, BUT i didn't put on all the keyboard / touch pad drivers / software (Quickset?)
will have alook tonight. Just got to work, 8hrs till home time YAY

Maverick3277
144 Posts
321
0
Posted July 15th, 2006 03:00