
UNSOLVED
Closed
Screen Problem
Hi,
I have a 510m and a quirky problem with the screen. When I first took the machine out of the box and started it up (to run it for the first time and complete the factory installation) there was some screen distortion. The screen appeared have horizontal line appearing and cause the display to break up. after I rebooted it seemed to resolve it self.
After a trouble free day, the problem appeared again. This time a reboot did not cure the problem and I just shut the machine down and left it for a few hours - problem went away.
It looks to me as if there is interference with another device (but there is nothing near the screen).
Any ideas?
John
Responses (1)
Solutions (0)

insp1150_14CK56
363 Posts
147
0
Posted February 6th, 2005 23:00