UNSOLVED

MarcusG

updated

21 years ago

Closed

M

MarcusG

8 Posts

0

6384

October 21st, 2005 17:00

Problems returning from 'Stand By' mode

Hello,
 
I've just got an Inspiron 1100.
 
I can't exit from stand by mode,.
 
Pressing the touchpad or keyboard doesn't appear to do anything - the monitor remains blank and the power button flashes slowly.  However, briefly pressing the power button seems to bring the monitor to life only for it to remain  blank, but the power button remains on.  Also, whenever an alphanumeric key is pressed a bleep sound is heard ('windows 'warning' tone?).  If you press the power button again, NOT holding on as if to shut down, it actually does shut down.
 
Have looked at the Dell user guides that can be downloaded from this site but they actually appear to be fairly minimal in detail and don't help.
 
Has anybody any useful info to assist me?
 
Thanks,
 
Marcus
  • ravik521

    2 Intern

    •

    1560 Posts

    262

    0

    Posted October 21st, 2005 23:00

    put it into standy and bring it out. Give it time. Sometimes computers might take awhile. Give it 10 minutes max. If it does not come out of standyby by that time. Run a diagnostics check on the whole computer.
  • ghost123uk

    29 Posts

    262

    0

    Posted November 6th, 2005 10:00

    I have the same problem on my C610, plus when I can coax it out of standby, the touchpad / mouse nipple is very erratic.

    This machine has all the latest drivers and BIOS (A16) and is running fully updated XP Pro

    I have seen this problem on other Inspiron . Latitudes too.

    Would be nice to get a solution :)

  • magnausea

    2 Posts

    262

    0

    Posted December 24th, 2005 20:00

    OK, after about 3 hours of messing with this, I was able to figure this out for my Inspiron 1100. I was having the same problem as you where the screen wouldn't come up after being in Stand By (standby) mode, or Hibernation. It would be a bit brighter then when the computer was off, but it wouldn't come up. Here's what I did:

    Windows 95/98/Me/2000/XP instructions - Check the Intel® Graphics tab
    Right-click on the desktop and select Properties.
    Click the Settings tab.
    Click the Advanced button.
    Click the Adapter Tab
    Click on Properties for the adapter type
    Go to the Driver Tab
    Click on update driver and have it search for a new one on the internet

    Mine, which now works, is 6.14.10.4342


    Maybe they released a new driver for this recently, but it was KILLING me. Hope this helps...if it does, Merry X-mas.