
UNSOLVED
Closed
P4 versus Centurion Performance
Which is better performance wise for graphics and multimedia? A P4 or a Centerion M. Basically the top of the line 5100 versus the top of the line 8600 (not taking the graphics card situation into effect)
Responses (12)
Solutions (0)
- Centrino 1.7 Ghz is about a 2.4 Ghz DESKTOP p4 some say, so it's about the same power as a 2.6 Ghz p4-m or 2.5 Ghz p4-m then 1.6 is about a 2.3 Ghz p4-m or so and so on down the line. This is highly disputed however, and everyone has their own opinion about it.
Truth be told, you'll be just as happy, if not more happy (because of added battery life), with a 1.7 or 1.6 Ghz P-M (Centrino) as with a 2.4 Ghz - 2.5 P4-M. Apparently, multiply by a factor of 1.9 to get-
1.4 Centrino = 2.66 P4
1.6 Centrino = 3.04 P4
1.7 Centrino = 3.23 P4
After using both, I see no reason to doubt the figures above-my 1.7 Centrino D800 EASILY keeps up with my 3.06GHz 5150, and betters it in most applications, and is configured similarly.
- Yeah I suppose that for a word processing and internet browsing because it's the same for nearly ANY computer made today and increasing the processor speed to 3.__ Ghz is not going to change this, but for anything besides basic tasks, then no.
- the multiplier is a rough number.
These don't scale directly to P4's, so for some applications, you could very well use a multiplier of 1.9...
In any case, they're a lot more fuel efficient and so far my 500m is a lot more stable than my friends 8500. They also run a lot colder with her temperatures reaching 140 degrees F, mine never passing 110.

todd33
19 Posts
476
0
Posted November 27th, 2003 01:00