UNSOLVED

kevin_hill

updated

21 years ago

Closed

0

10000

March 17th, 2006 02:00

Network interface card disappears

Hi all,
 
I have a Dell D600 laptop for the last one year and I had no complaints till reccently.
 
The wired network started to malfunction. My connection to the network used to just disappear and reappear again.
 
Suddenly yesterday the 'Local Area Connection' disappeared and after that it has not appeared again.
 
When I go into the BIOS setup, on page three I see an entry 'Lan Controller' which shows up as disabled. Also the entry 'Internal Modem' also shows up as disabled.
Does this have anything to do with my inability to connect to the network ?
 
Unfortunately I do not have the Admin password for the BIOS. (I am the second user of the laptop and the original user, who has left my organisation, cannot be contacted )
Does anyone have any idea how I can reset the password ?
 
 
regards,
Kevin Hill
 
 
  • Ed C

    2 Intern

    •

    3247 Posts

    469

    0

    Posted March 17th, 2006 11:00

    Yes that setting in the BIOS has a lot to do with whether or not the LAN (NIC) works. If set to disabled it doesn't work.

    If this is a business PC then have the IT guy call Dell support and get the master password for that unit and remove all the BIOS passwords.

    Then of course set the Network controller to Enable. If it keeps changing back to disabled then you have either a hardware problem, motherboard will need to be replaced, or some type of virus that can actually access the BIOS settings. I personally have never heard of one but that doesn't mean there isn't one out there that can do that.

    Message Edited by Ed C on 03-17-2006 08:40 AM

  • 469

    0

    Posted March 17th, 2006 11:00

    Hi Ed,


    Thanks for the reply. That is exactly what I did. got in touch with Dell support and suprisingly I got my master password in 3 to 4 hrs. Well this is the first time that the Network controller got disabled in the BIOS setup. What happens is that the network connection gets disabled once or twice every day (I use the laptop for around 12 hrs daily). A restart every time seems to do the trick.

    I think this may be a hardware issue. How do I find out for sure ? When the NIC works the diagnostics on the NIC show everything as fine. Off course when the lan controller got disabled in the BIOS the NIC test does not even show up in the Diagnostics utility.

    regards,
    Kevin
  • Ed C

    2 Intern

    •

    3247 Posts

    469

    0

    Posted March 17th, 2006 12:00

    Make sure you are running the newest BIOS version and if you are then I suggest you backup your DATA files ONLY. Wipe the drive (Format it after deleteing ALL the partitions) and do a CLEAN install of the OS, notebook drivers and all your software from KNOWN GOOD and CLEAN CD disks, not from a image of that unit or a corporate image. If the NIC still gets disabled then it is a hardware problem and again call Dell TS to get the motherboard replaced.

    To be honest this is the first time I have ever heard of the setting in the BIOS changing all by itself. Could be a heat issue. But I've never heard of it.

  • 468

    0

    Posted March 20th, 2006 11:00

    Hi,

    Surprisingly I havent had any problems again. The only thing I am worried about is whenever the laptop starts up, I have a message in the event manager under system as follows :-

    **********************************************************
    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7000
    Date: 3/20/2006
    Time: 7:18:18 PM
    User: N/A
    Computer: P00100547-8480
    Description:
    The Standard HID Class Driver service failed to start due to the following error:
    The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    **********************************************************


    Any one have any idea what this error could mean ?
    Could it be linked to the previous problem ?

    regards,
    Kevin Hill
  • Ed C

    2 Intern

    •

    3247 Posts

    468

    0

    Posted March 20th, 2006 12:00