UNSOLVED

jesst7

updated

21 years ago

Closed

J

jesst7

37 Posts

0

12242

January 30th, 2006 14:00

motherboard question

I've got a dell inspiron 8500 that won't turn on because of no connection to the power connector, if I buy a new motherboard(asus) would it be compatible with the dell?
  • mugnas

    6 Posts

    342

    0

    Posted January 30th, 2006 15:00

    I don't know whether the asus motherboard is compatible with Dell, but the part number for the Inspiron 8500 motherboard is H1111.

    My laptop (also an Inspiron 8500) crashed last week, and when I start it up it won't stay on for more than 3 minutes before it freezes or shuts down. I've had contact with Dell Support, and they first told me it was the hard drive that was bad. So, I bought a new hard drive, but the laptop still wouldn't start.

    I called Support again, and after checking all hardware, I removed memory cards from both slots and tried to boot. Now, all 3 LEDs below the screen lit up, and this was, according the man at Support, a sigh that the motherboard was the problem. So, now I have to replace the motherboard, and I wonder if I have to use the same motherboard as before (H1111) of if perhaps the Inspiron 8600 motherboard may be compatible?

    And where can I order such parts?

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    342

    0

    Posted January 30th, 2006 15:00

    No. The only board that will fit and work is another 8500 board - the successor model (8600/D800) uses a different CPU, and no one else offers a board that will fit.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    342

    0

    Posted January 30th, 2006 21:00

    The 8600 board will require you to purchase a new CPU - it uses a Pentium-M, not the mobile Pentium 4-m that the 8500 used.

    The cost of a board will be about $500 and no matter where you buy it, will be refurbished and come with only a 90-day warranty. Dell Spare parts sells them, as do a few Dell parts resellers:

    Dell Spare Parts 1-800-449-3355 ext 7269937

    www.impactcomputers.com

    www.parts-people.com
  • wongojack

    21 Posts

    342

    0

    Posted March 9th, 2007 23:00

    not getting bumped
     
  • wongojack

    21 Posts

    342

    0

    Posted March 9th, 2007 23:00

    Old thread, but I'll add to it anyway in hopes a moderator is keeping up.
     
    Is the only compatibility issue between the 8500 and the 8600/D800 Motherboard the CPU?
     
    My 8500 Mobo is acting up and I'd prefer to replace it with a Pentium M compatible one.  I can get the CPU but if there is some case plug that wont fit then I'm .
     
    Just wondered if anyone had tried this.