UNSOLVED

rangerdavid

updated

19 years ago

Closed

R

rangerdavid

16 Posts

0

15274

February 7th, 2008 21:00

monitor light management (SOLVED!! by Bay Wolf)

when i unplug my laptop, the screen automatically dims. How can I stop this from happening? If it matters, its an Inspiron 6000. Thanks!!
Message Edited by rangerdavid on 02-08-2008 09:03 PM
Message Edited by rangerdavid on 02-09-2008 07:40 PM
  • Neill78

    10 Posts

    585

    0

    Posted February 9th, 2008 01:00

    I don't know if this works on Dells, since my battery is toast, but you can try it anyway. Unplug your laptop, adjust the brightness back to how you'd like it, and plug your laptop in again. No guarantees that it'll save your settings.

    My old Dell Inspiron 8000 had the brightness settings for AC/battery in the bios, so you could try looking in there too.

    Neill


  • rangerdavid

    16 Posts

    585

    0

    Posted February 9th, 2008 01:00


    any help at all??  Anyone?  Moderators???  :smileyhappy:
  • _Allan_

    128 Posts

    585

    0

    Posted February 9th, 2008 14:00

    Power Settings in the Control panel will allow you to adjust the settings for the LCD brightness.  if you have Vista clck start, and type Power Settings, if you have XP click Start then Control Panel then P ower Settings.



    Allan
  • Bay Wolf

    4438 Posts

    585

    0

    Posted February 9th, 2008 23:00

    What you describe is a battery power saving feature on notebooks.

     

    For a Dell Notebook, when you unplug the power adapter, you can use the Fn key and the up arrow key to increase the brightness of your screen.  You should only have to do this once.

     

    The next time you unplug the power adapter, it should be as bright as what you set it at.  I just tried it on mine and it worked as I described.

     

     

  • rangerdavid

    16 Posts

    585

    0

    Posted February 9th, 2008 23:00

    Bay Wolf,

    thanks!!  that did the trick!
  • Bay Wolf

    4438 Posts

    585

    0

    Posted February 10th, 2008 01:00

    You are welcome.