UNSOLVED

BlickTX

updated

18 years ago

Closed

B

BlickTX

1 Rookie

•

17 Posts

0

7335

November 23rd, 2008 06:00

Missing Screws

System Type Inspiron 6400/E1505
Ship Date: 9/8/2006

And I love it -- except that there are now two screws missing.  They simply hold in the hard drive, so I can't very well do without them.  Can someone, without requesting $50 to do so, tell me what size screws are necessary for replacements?

Thanks!

  • jackshack

    6447 Posts

    1588

    0

    Posted November 23rd, 2008 07:00

    Did you check out the service manual, which is available on line?

    Try looking here:  Inspiron 6400 Service - Hard Drive 

    <ADMIN NOTE: Broken link has been removed from this post by Dell>

     

  • TheRealFireblad

    4 Apprentice

    •

    4639 Posts

    1588

    0

    Posted November 25th, 2008 01:00

    I had a look at a service manual for another model of Dell laptop just a couple of days ago (somebody else had lost two of the screws for their optical drive!), and whilst it shows how to remove/replace drives (hard drive/optical drive), it doesn't mention the screw sizes used.

     

    BlickTX:  Have you contacted tech support, and asked them?  

    Alternatively... your local computer repair shop will have them.  Just ask for screws suitable for securing a laptop hard drive (they're usually a universal size) :emotion-5:

  • BlickTX

    1 Rookie

    •

    17 Posts

    1625

    0

    Posted November 25th, 2008 05:00

    TheRealFireblade said:  Have you contacted tech support, and asked them?

    Yes, I did -- right after checking the manual.  However, the laptop is out of warranty and tech support told me it would cost $49.95 to ask the question.  Then I signed up for the Forums and spent a lot of time searching for comments on the subject.  Then I registered and spent another hour working through a rather lengthy learning curve to post this question.

    Living 25 miles from the nearest town, 45 miles from an actual computer repair shop, I've come to expect -- and appreciate! -- answers available through the net and telephone before burning gas.

  • BlickTX

    1 Rookie

    •

    17 Posts

    1625

    0

    Posted November 25th, 2008 19:00

    Could you provide a link to that service guide?

  • jackshack

    6447 Posts

    1625

    0

    Posted November 25th, 2008 19:00

    While many service guides don't mention the size of the screw, this particular one does.  The screws for retention of the hard drive are M3 X 3mm; this is a description of a metric fastener 3mm in length, size M3.  The only thing not mentioned is the thread pitch, but a common pitch for this size fastener is .5mm.

  • TheRealFireblad

    4 Apprentice

    •

    4639 Posts

    1625

    0

    Posted November 26th, 2008 08:00

     

    Living 25 miles from the nearest town, 45 miles from an actual computer repair shop, I've come to expect -- and appreciate! -- answers available through the net and telephone before burning gas.

     

    Fair enough... no problem :emotion-5:

  • BlickTX

    1 Rookie

    •

    17 Posts

    1625

    0

    Posted November 26th, 2008 15:00

    Been there, done that, logged inito my account with my laptop defined by Dell. 

    Obviously I missed the 3x3mm screw info and was requesting the specific link to the page that I've overlooked as I moved through dozens of pages.  Some that simply state the need to look at the next page.  I was hoping for a searchable service guide.

  • jackshack

    6447 Posts

    1625

    0

    Posted November 26th, 2008 20:00

    The title of the Inspiron 6400 Service Guide in my first post is a link to the hard drive service page.  Just below the photo of the hard drive you will find the info I quoted.  I think that all the service manuals should have this sort of info, and it's a pity that not all do.

  • Art

    2 Intern

    •

    1513 Posts

    498

    0

    Posted November 26th, 2008 20:00

    Here is a direct link to your screw page.

    Just click on the line above, but for benifit to others;

    Easy to access, just select Support at top of this (or any) page and then "Product Support"

    then select "Manuals" and fill in 'Pop-Up' with your Service Tag or Type and Model..

  • BlickTX

    1 Rookie

    •

    17 Posts

    498

    0

    Posted November 27th, 2008 04:00

    Thanks for the followup -- the user support available in Dell's forums is among the best I've seen.  I am grateful for the money-saving responses that provided what a non-technical grey head needed.