TxGolfer

updated

15 years ago

T

TxGolfer

6 Posts

0

53835

June 13th, 2011 14:00

Memory Upgrade on Inspiron E1505

I recently upgraded my Inspiron E1505 to 4Gb(2-2gb sticks) and it only recognizes 2 Gb  total installed.  Do I need a Bios upgrade for it?

  • Mary G

    6 Operator

    •

    20095 Posts

    4523

    1

    Posted June 13th, 2011 15:00

    2GB is the max you can install on this model. Return the 2gb chips and get 2 1gb chips instead. See this Crucial site.

     

  • Philip_Yip

    11 Legend

    •

    16052 Posts

    •

    65915 Points

    4608

    1

    Posted June 14th, 2011 08:00

    I think your sticks are mislabelled. You should write to where you purchased them. Crucial will detect the installed memory correctly even if your system can't use it all..

    Your system has pretty much identical specifications to mine, so you know it can take 3.24 Gb.

  • Philip_Yip

    11 Legend

    •

    16052 Posts

    •

    65915 Points

    4608

    0

    Posted June 13th, 2011 17:00

    As you can see the crucial scanner says you can put a maximum of 1 Gb in each slot but in my case detects 2 Gb in each slot.

    Dell Support Centre says the maximum supported RAM is 4.0 Gb.

    Windows 7 detects 4 Gb of RAM and can use 3.24 Gb of it.

     

    Therefore run the crucial scan to check that it is detected the 2×2 Gb modules and not just one of them which eliminates one module not being seated correctly.

    Secondly change the boot settings: 

    Press the windows key and r (at the same time) then type msconfig in the run box. Go to the boot tab, then advanced options. Uncheck, the number of processors and maximum memory, reboot see if you can use more memory.

  • Philip_Yip

    11 Legend

    •

    16052 Posts

    •

    65915 Points

    4608

    0

    Posted June 13th, 2011 17:00

    Note you should be able to access 3.24 Gb of RAM not 2.0 Gb as stated.

    I am on BIOs revision A17 and I get 3.24 Gb out of the 4.0 Gb I put in.

    What OS are you using and what CPU do you have?

  • TxGolfer

    6 Posts

    4608

    0

    Posted June 14th, 2011 07:00

    Using the same bios A17 and win 7 - 32 bit

  • TxGolfer

    6 Posts

    4608

    0

    Posted June 14th, 2011 08:00

    Your Inspiron E1505 System Specs

    Scan Id: 9EF9A9C931D926C3

    Memory:

    DDR2 PC2-5300

    Memory Type: DDR2 PC2-5300, DDR2 (non-ECC)

    Maximum Memory: 2GB

    Currently Installed Memory: 2GB

    Total Memory Slots: 2

    Available Memory Slots:  0

    1GB

    DDR PC2-5200

    1GB

    But the sticks show:

    Patriot PSD 22G533sk

    2Gb pc2-4200 CL4

  • Philip_Yip

    11 Legend

    •

    16052 Posts

    •

    65915 Points

    4608

    0

    Posted June 14th, 2011 08:00

    You should be able to access 3.24 Gb of RAM, like mine. Did you change the settings in MSCONFIG and run the crucial scan. What does Dell Support Centre and system information say.

    What does the BIOs setup say F2 at start say?

  • Philip_Yip

    11 Legend

    •

    16052 Posts

    •

    65915 Points

    4608

    0

    Posted June 14th, 2011 09:00

    No problem. As an aside for windows 7 32 bit.

    I installed the following drivers

    1. Dell Notebook Software: R143625

    2. Chipset: Intel: R140623; Ricoh: R141246

    3. ICS_Ds32 (Intel WiFi card)

    4. Touchpad: R141200

    5. Dell Quickset: R166699

    6. Bluetooth: R226750, for Dell Wireless 270 Bluetooth module but works with the 255 and 250. Had a great number of problems with bluetooth using the Vista drivers.

  • TxGolfer

    6 Posts

    4608

    0

    Posted June 14th, 2011 09:00

    Thanks for the help.

  • Mr_bleu

    211 Posts

    783

    0

    Posted June 14th, 2011 16:00

    Lies.  I own an insprion E1505, changed the processor to a T7200,  and installed 4gb of ddr 667 memory.  I also use a 64 bit operating system.  Max amount of memory shown is 3.3 gb.  If he/she's using a 32 bit os, then 2gb might be max amount usable.