UNSOLVED

XAKEP

updated

19 years ago

Closed

X

XAKEP

36 Posts

0

28434

November 25th, 2007 20:00

M1710 Nvidia GeForce Go 7950 GTX upgrade to Go 8800M ---DELL PLZ RESPOND---

Well here is 1 million questions and I am sure many M1710 owner have will upcoming 8800M MXM Card will be same size a characteristics as 7950 MXM .... I hope so .. and I am sure there is more to it ....Thermo, Voltage I am sure many other things .... but ,,,, let's say if someone willing to rebuild heatsink if it possible.... someone from DELL can comment on this ?
 
 
 
P.S.
 
There is many places that you can get 7950 GTX card to replace one already inside your laptop ....is there a direct part # from dell that i can get it direct in case something is happen.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    338

    0

    Posted November 25th, 2007 20:00

    The M1710 uses a proprietary card, not MXM.

    Dell will almost certainly not release any further upgrades for the M1710 - the M1730 is already out and uses a different form factor card (which is also not MXM).
  • XAKEP

    36 Posts

    338

    0

    Posted November 25th, 2007 20:00

    Okay let me correct myself ...well and you too. It is an MXM ! IT's modified . oh and also 8800 WILL be available for M1710 with MXMIII and most likely we'll be able to do it.
     
    Once again someone from DELL plz respond.
  • XAKEP

    36 Posts

    338

    0

    Posted November 25th, 2007 21:00

    Got you .... I was thinking Nvidia created MXM format for VERY reason so end user can finally upgrade cards as they go faster and DELL picked it up and modified some features .... and then I find out 7950 GTX for sale in case of burn out .... and will next logical step was if size remain the same you can swap it with a 8800 .....I guess I was wrong .... so you saying even if size will be the SAME as 7950 I still will not be able to run it even if it will fit perefectly ...?
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    338

    0

    Posted November 25th, 2007 21:00

    Very few ODMs make MXM-compatible systems - the form factor has basically been ignored by the Taiwanese and Korean companies that make 80-90% of the world's notebooks.

    Here's the card for the new M1730:

    http://support.dell.com/support/edocs/systems/xpsm1730/en/sm/sysboard.htm#wp1032636

    Here's the card for your M1710:

    http://support.dell.com/support/edocs/systems/xpsm1710/en/SM/video.htm#wp1006368

    Clearly the new card won't fit the old system - and Dell has never released a new card for a system that has been replaced.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    338

    0

    Posted November 25th, 2007 21:00

    Sorry, but the card is NOT MXM, which is something Dell has never used in any notebook. Is the design based on MXM? Perhaps. Is it in any way compatible with MXM? Nope. If a card does arrive (and it'd be precedent-setting, since each new generation of XPS has used a card not useable in a prior version:

    XPS Gen 1, then Gen 2 (cards not compatible), the M170/M1710 (not compatible with either of the foregoing), M1730 (not comptible with M1710) ...

    See the pattern?

    If you have conclusive proof otherwise, please post your link. Otherwise, it's unsubstantiated hearsay.

    Here's the scoop on MXM and major manufacturers, by the way:

    http://www.mxm-upgrade.com/notMXM.html

    Message Edited by ejn63 on 11-25-2007 06:04 PM