
UNSOLVED
Closed
W
WesleyTack
20 Posts
0
12019
October 9th, 2008 14:00
m1330 blue screen + crash?
hello,
I was moving some data from my laptop to my computer using the free FTP program: filezilla.
While it was movign the data i closed the lid, later when I opened it again, VISTa had crashed
and gave me a blue screen. Today I tried turning on my laptop again, and it gives me a blue
screen and goes over to "repair mode". Repair mode doesn't find anything to repair and VISTA
gives me this error: 6.0.6001.18000.6.0.6001.18000
I fear I will loose all my data, is there a way to copy my data to my other computer before doing
a factory settings repair? (if that will even work). I really would like to backup what I have first.
Right now I'm looking into to making a bootable CD using LINUX KNOPPIX (I hope this will help
somewhat). But if there are any way's using VISTA or something from DELL to backup my files
I would prefer doing it that way. Does anyone have any ideas or tips to do this?
Thanks,
- Wesley
Responses (4)
Solutions (0)
WesleyTack
20 Posts
404
0
Posted October 9th, 2008 15:00
I can access my files using KNOPPIX, which means I guess my HDD is ok, maybe I can just fix the VISTA boot.ini or whatever is broken via linux? I just don't know what VISTA uses during startup that I need to fix, or how a working BOOT.ini or autoexec.bat looks like?
Anyone any ideas?
Thanks!
-wez
WesleyTack
20 Posts
404
0
Posted October 9th, 2008 22:00
Well, I was able to backup pretty much everything that was important,
this thanks to UBCD BOOT CD and winXPSP2. After that I inserted the
VISTA install CD that came with the laptop, and tried repair, but that
didn't work, so I had to repair the factory setting defaults, thus losing
all my preferences. I am now setting it up again and will then make an
image of my up to date system, so this wont happen again. I'm pretty
sure the whole crash / blue screen is due to VISTA somewhere. Either
way, I guess this thread is solved, fixed.
Thanks for the help!
-Wez

ejn63
11 Legend
•
87469 Posts
•
321256 Points
404
0
Posted October 9th, 2008 14:00
Use Knoppix or remove the drive, mount it in a USB 2.0 case and attach it to a working system by USB. See what you can read.
Then run the extended diagnostics on the drive (F12 at powerup).