UNSOLVED

darktrancer

updated

16 years ago

0

66053

July 21st, 2009 11:00

Latitude E6400 BSOD when undocked from docking station

Everytime we undock our new Latitude E6400 from our docking station we get a blue screen of death, the laptop is running on the dell factory image.

The laptop has a built in mobile card (sprint), webcam, fingerprint reader and brand new docking station.

Can anyone point me in the right direction to get this problem resolved?

  • berthman

    1 Message

    2938

    0

    Posted August 12th, 2009 03:00

    I'm experiencing a similar issue in the UK. I have the advanced port replicator and full sized Dock, Fingerprint, inbuilt 3G Wireless, B/tooth etc.

    I have issue where the mahcine will not shut off, and then I'm told on reboot that the system recovered from a serious error

    I am now trying to research in the Event log and see that I'm unable to run the events due to another unrelated issue (http://www.vistax64.com/vista-general/35942-cant-start-event-log-service.html) I'm on x32, same issue.

  • tw_

    6 Posts

    2938

    0

    Posted August 26th, 2009 13:00

    We have E6400 (full dock, 3G, Bluetooth but not Fingerprint) and we had a lot of random blue screens under Vista Ultimate x64 especially when docking and undocking. I used the kernel debugger WinDbg to look into the crash dumps and it turned out that these crashes occured in the Creative Labs webcam driver or the Intel Matrix Storage driver.

    The webcam issue could be fixed with a driver update (an optional update in Microsoft Windows Update and also available from Dells driver site) while the Intel issue kept coming back sometimes though we upgraded it too with the latest driver.

    Recently I installed Windows 7 Enterprise x64 and haven't seen either of those issues yet. But I used the latest Intel Matrix Storage Driver 8.9 from Intels site which is ready for Windows 7. Also I avoided installing the Dell Control Point software except for the drivers. I have some minor issues with 7 (the Dell Bluetooth driver damages the Windows help files) but I haven't had any blue screen yet.

  • JCoppedge

    13 Posts

    2938

    0

    Posted February 16th, 2010 05:00

    Lock ups can be caused by the following:

    Hardware:

    Replace motherboard, heat sink, and docking station.

    Software:

    Disable LPT and Com ports in the bios.

     

    My e6400 had throttling issues and BSOD on undock every time.  The combination of all of the above seems to have fixed it.

  • pparkerer

    1 Message

    2938

    0

    Posted June 28th, 2010 09:00

    Software:

    Disable LPT and Com ports in the bios.

    Thank you so much! This worked flawlessly for me. I wasn't able to undock without BSOD before, now everything is working! :D

  • Dave-117

    1 Message

    2938

    0

    Posted March 10th, 2011 21:00

    Yes, disabling the LPT and COM ports in the BIOS worked for me. (How to: restart, tap F12 a coupla times right away, use arrow keys to disable the Parallel and COM ports. Apply. Restart....no more blue screen.