
UNSOLVED
Latitude D820--unusable in docking station with Vista--Tech Support refused to help
I have a Latitude D820 that I have reloaded with Vista Ultimate (32-bit) after replacing the hard drive. When it is in the docking station, the System process goes up to 100% CPU usage and the computer is unusable. If I start it without being docked, it works just fine. I have tried it on other docking stations and get the same problem.
I contacted Dell tech support as I have a Gold Prosupport contract for the laptop. They refuse to help as it was not loaded with Vista originally.
Has anybody else had this issue or a fix for it short of wiping my drive and reinstalling XP?
Responses (6)
Solutions (0)
I have a D-820 as well and I just contacted Dell and was told this is basically not their problem. Replacement dock did not work, they stated it must be something I installed. Did not seem happy that this was Vista. Told me that if everything works undocked then it's not a hardware problem as well. Had this problem a while back and ended up creating a new partition and reinstalling Vista. This seemed to work for about 6 months, now the problem is back and cannot figure why. Currently the mouse is in the dock and the keyboard is in the laptop.
Seems like Microsoft and Dell should get in a room and hammer out this dock issue. This stinks having to troubleshoot these types of problems.
I have a Latitude D630 and a D/Dock. I was running Windows XP SP3 under BIOS A15. Laptop worked perfectly in D/Dock. I then saw BIOS upgrade and performed the upgrade to BIOS A16. Laptop locks up after hardware post prior to Windows splash screen. I reloaded A15 and it worked again. Tried the A17 upgrade currently available and same lock up. I don't know if the CPU was pegged or not as windows was not up and couldn't tell.
Here is a new twist to the D/Dock dilema. I bought a new harddrive with intention of loading Windows 7 32-bit. I undocked the laptop and installed the operating system without incident. I powered down and placed into the D/Dock to take advantage of the two screens attached to it while I started loading other apps. Upon powering up I received a blue screen with message:
"The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS." Accompanied by STOP: 0x000000A5
Thinking that Windows 7 was a new and improved world I decided to install Dell's latest BIOS A17 again. It locked up in same place as Windows XP. Reinstalled BIOS A15 and it blue screens again. It appears I need a fix for the ACPI compliance outside of the BIOS upgrades that lock up my laptop when docked in a D/Dock.
Dell are you listening? Any suggestions?

swswx
1 Message
470
0
Posted August 15th, 2009 04:00
I am experiencing the exact same problem. I noticed it sometime after I upgraded my Precision M65 to Vista Business on a new hard drive, and it did it ONLY when it was snapped into the D-Dock. However, there is a slight twist to this story. Because I thought it was related to Vista I reinstalled Vista just to eliminate the possibility of a bad install. Problem returned after clean install. So I swapped back the original hard drive with the original XP Pro installation. Problem still exists. Reinstalled XP Pro. Problem still exists. Hmmm... So I thought, to elimnate the possibility of it being the laptop itself, I decided to try my Inspiron 8600 which is physically compatible with the D-Dock.... and guess what... PROBLEM EXISTS TOO and it NEVER did before with the Inspiron...... CPU runs to 100% after a few minutes with no rhyme or reason.
The one thing I did notice that was common with both laptops was that it got very hot under the laptops where the d-dock connector is located. Hmmmmm.
So now I have concluded that it has to be the D-Dock itself. Something has failed with it, causing it to heat up and running the CPU to 100%. I'm kinda screwed since my d-dock is out of warranty and discontinued. Time for me to look for surplus retailers who may carry some.
Hope this helps anyone struggling with the same problems.
-Will