UNSOLVED

burgie1963

updated

20 years ago

Closed

0

11482

June 29th, 2006 17:00

Interesting problem...I think??

Greetings,
 
My son's Inspiron 1200 died last night. Actually, he ran a defrag and then a virus scan w/ no detections. Later in the evening he turned it on and mid-way thru the XP boot it crashed with a blue screen and a single memory address. I powered it down, reseated the SIMM and then same issue at start. His laptop was pretty loaded with junk so I figured I'd rebuild it.
 
Booted the OS disk, formatted the HD and started the reinstall. System started copying files and during the "Installing Windows" stage (with "Setup will complete in approximately: 34 minutes) the system just stopped doing anything?
 
Hmmm...so I started the process all over and same thing. I inserted the Diagnostics CD, held the key and powered on as Dell indicated. Diagnostics started and all tests ran PASSED until it didn't detect a diagnostic partition (I formatted the HD).
 
So, any ideas on how I can get Windows loaded again? Did I forget something here? Any additional tests I can run?
 
Any help would be appreciated!!!
  • Mary G

    6 Operator

    •

    20095 Posts

    313

    0

    Posted June 29th, 2006 18:00

    There's a MS article about the install stopping with 34 minutes left: http://support.microsoft.com/default.aspx?scid=kb;en-us;815319 
  • boppo

    2 Intern

    •

    4376 Posts

    313

    0

    Posted June 29th, 2006 18:00

    good one Mary G.
  • boppo

    2 Intern

    •

    4376 Posts

    313

    0

    Posted June 29th, 2006 18:00

    i would bootup with the windows cd in and delete all partition except the small on which has the diagnostics on it and create a new one and format and install it again.
  • nerv2010

    5 Posts

    313

    0

    Posted June 30th, 2006 15:00

    Also try reseating the HDD to be sure it's all the way in. I've had problems before with the HDD getting loose and having similar episodes.
  • 313

    0

    Posted June 30th, 2006 16:00

    Well...I reseated the battery, HDD and SIMMS and then started a fresh reload complete with full format of the HDD. Everything worked and after the install I reinstalled my Linksys wireless card, connected to the web and Windows is now fully loaded with SP2 and all the other gazillion updates from "Microsoft Update".
     
    I have no clue why this happened...but everything seems to be working fine now...
     
    Thanks to everyone for their inputs and feedback...and hope everyone has a wonderful 4th of July weekend!!!
  • boppo

    2 Intern

    •

    4376 Posts

    313

    0

    Posted June 30th, 2006 17:00

    i am glad your back on line and glad to help. you too have a super 4th.