
UNSOLVED
Closed
Inspiron 5100 won't boot - Blinking Caps Lock LED
I have an Inspiron 5100 as soon as I push the power button, the caps lock LED starts blinking at about 1 Hz. After about ten seconds the power goes off. I've removed, swapped, and reseated the RAM modules, removed and reseated the WLAN card, CD-ROM, LCD Screen connector, and keyboard connector.
Any idea what the single blinking LED means?
Thanks.
-jeff
Any idea what the single blinking LED means?
Thanks.
-jeff
Responses (11)
Solutions (0)
- I am facing the same problem of Caps Lock Blinking or sometimes CapsLock and ScrollLock both being on. Earlier if I removed and replaced the battery, memory and HDD it would work sometimes, but I would still get a warning stating that only one slot is being used.
So I started using only Slot A and it started working fine (I had to reset ram sometimes). But now, after couple of weeks, even that has stopped working.
Any idea what I can do with this. Dell support told me that it is probably motherboard error. I am not sure whether its worth invest .5 times the original cost of the laptop's value back into it or not, considering that I am not sure if this will fix the problem.
Any comments :) ? - the machine is too old to justify a new board. it could be ram, it could be the board, or it could just be the ram slot. if you've tried both slots individually with different ram sticks (at least 4 possible combinations) then you're likely out of luck
- You are right.. its an old one :) The sad part is that I had called Dell for extending my warranty 5 months back and they never got back to me. Plus I just quit my job hoping to do somehting on my own, so this would be an unwated expense;)
That apart, do you know what Scroll and Caps lock both on (not blinking) signifies?
Thanks a ton,
AzadMessage Edited by hazad on 12-15-2005 01:13 AM
- Hey,
I tried putting the RAMS individually in all four positions.
I. When I put either of the Memory Chips into DIM A (DIM B empty) and power on the laptop -> Caps lock blinks for 10 seconds and then the laptop powers-off.
II. When I put either of the Memory Chips into DIM B (DIM A empty) and power on the laptop -> Caps and Scroll lock are light (they do not blink) and then the laptop powers-off in 10 seconds.
III. When I put both of the Memory Chips in -> Randomly case I and II occur and the laptop powers off in 10 seconds.
In all cases:
1) Nothing comes on screen.
2) I can hear CPU heatsink fan turning on.
3) I can hear HDD activity.
4) Power light is on for the ten seconds and HDD and battery light are not light.
a. Whats the most likely problem?
b. Can I get the faulty component repaired, instead of replacement by a third part if not Dell?
Thanks.
Regards,
Azad

emt036
2 Posts
1093
0
Posted November 24th, 2005 15:00