
UNSOLVED
Closed
D
delboy0007
9 Posts
0
25437
January 5th, 2004 16:00
***********I8100 geforce upgrade help needed
Hi Guys,
I need some help well errm advice really! I'll go straight into it...i have an i8100...512mb...1600*1200 screen uxga...48hdd...and a geforce 2 go. I have just purchased a geforce 4 64mb...and i want to install it on my i8100...is this an easy process....oh by the way bios is A15 what drivers do i need for the geforce 4...do i uninstall the drivers for the geforce 2 first then go ahead with the install of the gforce 4 64mb...if someone can help me out with this it would be much appreciated.
I will have my geforce 4 64mb by wednesday :-)
thax inadvance
Responses (18)
Solutions (0)
delboy0007
9 Posts
423
0
Posted January 6th, 2004 08:00
Hi Rob,
Yes im in the uk and yes it was brought from ebay!
Will have my card tomorrow...so got to get much information as possible of what steps to take when updating the graphics card.....any questions i'll post on this thread!
thx again
delboy0007
9 Posts
423
0
Posted January 6th, 2004 10:00
Just got my card deliverd now via city link!!
On the back it says nvida geforce 4 inspiron 8100 64mb R2DAFC8A.
Want to get this installed as soon as...i have the afternoon free, I'll have a search of the removal/installation procedures but if anyone can post the link that will be greatfull also if there is anything else i should know....
So i remove the existing driver for my geforce2 go
Remove the geforce2.....
Fit the geforce 4 64mb
Put laptop back together and then install drivers for the geforce 4 64...what drivers should i use? that will give me the best performance from the geforce 4......my bios version is A15
Thx again
Well i just upgraded my I8100 to the Radeon 9000 it was very simple. You remove 4 screws on the bottom of the laptop to removed the keyboard. Then just pry the keyboard up with a screwdriver gently. once it is removed remove the monitor hinge cover with a non scaring tool like a flat head screwdriver. Once the keyboard and monitor hinge are removed you can see the video card in the middle of the laptop. Remove the monitor cable gently. Now just take out the 3 screws holding it in and pop the video card off and then reverse the process to install the new one.. Be careful with the monitor conneciton and the video card connecter.. only press down on the sides and not in the middle..
Sorry don't have any info about bios and drivers like i said i upgraded to the Ati Radeon card
http://docs.us.dell.com/docs/systems/ins8100/en/sm_en/remove.htm#1024986 this is the link to the the actuall info about removing and installing the parts.. it has basically the same thing but some details i didn't include.
Good luck
I8100 1ghz Pentium 512mb ram ATI Radeon 9000 64mb 15"UXGA 3dmark2001SE ~5109 3dmark2003~859
You might also want to try www.omegacorner.com
You guys are on the right track. I have a UK I8100 but have moved back to the US a little over a year ago. The UXGA should not have any problems with the GF4 upgrade. If you get a blank screen on the start up prior to windows loading, then look for my other posts to get the help you'll need. As for the SXGA problems, unfortunately we're still stuck with the 29xx drivers unless (until) we have another break through.
- i would say download the drivers from www.omegacorner.com first. If they don't work have the Geforce 4 drivesr ready that are for the 8200 laptop since that is the card you are using
delboy0007
9 Posts
423
0
Posted January 6th, 2004 13:00
Thx for the help and advice...just one thing Im unsure about....and id like to get it sorted before i go ahead with the install.
I'm not sure which drivers to dload for the geforce 4 go ......as when i have installed the card and booted machine up it will ask to install the driver for the card...can someone recomend which driver should i use...been to the NVIDIA site and i couldnt find a driver for the geforce 4 go to dload....can someone suggest or point out which one shall i dload....where from.
thx again
delboy0007
9 Posts
423
0
Posted January 7th, 2004 10:00
Just about to do the upgrade....just a few things to make sure...I've been to the omegacorner and im not sure what driver to dload can you help me on this..just point out which one i should dload.
I've also been to the nvidia site and have dloaded the 53.03 winxp 2k english whql driver as well ....but wanted to try the omega drivers...if someone can point it out to me which one they are using etc that would be great.
Also my bios is A15 is that ok for the upgrade or do i have to downgrade my bios first.....the bios version for the i8200 is A3 withe the geforce 4 drivers...
awaiting info before i start the upgrade
thx again in advance
Bad news so far:-(
Uninstalled old card drivers.
Physically removed and then installed new card (around 30Mins being extra careful)
Connected external monitor and then took VBIOS back from 4.17.00.55 to 4.17.22.F6.
Rebooted and can now see XP loading screen and the user login screen on both LCD and external monitor. This is at XP's standard VGA drivers, so at least the card works and the LCD harness is still OK. (Can not see 'Press F2' screen on LCD, but can see on external monitor.)
Then installed Frankendriver 28.90 and re-booted. Can see XP loading screen on LCD, but display blanks on XP login screen. External monitor works fine and got 3D2001 of 4402.
Then tried installing dell 28.35 drivers, but they did not work at all.
So the problem is that the LCD screen only works with XP's basic VGA driver. Any clues or other drivers to test?

Rob_S
7 Posts
423
0
Posted January 5th, 2004 20:00
Bit nosey but ... Are you in the UK and just bought from EBAY?
Just about to do the same, but with the troublesome IBM 1400x1050. Read all the threads and it seems that you uninstall existing driver then switch off. Upgrade card and then install latest driver (Dell or modified inf + NVIDIA). Unfortunately I will have to use 29.80 driver.
I've also got to have an external monitor handy (LCD does not display until driver installed) plus may have to de-grade VBIOS for 'blank screen' problem, but I've collected all the files on my hard disk ready.
If our USA residents are there, I'll share my experiences when it is back running. I'm expecting around 4500 3d2001SE, so a good improvement over my existing result.