
UNSOLVED
Enable Hybrid SLI on XPS 1340
Hello, everyone,
I have a new notebook Studio XPS 1340, with Vista Home Premium (64b). I can't tell if I have Hybrid SLI enabled. I don't see the green NVIDIA Hybrid SLI icon in the tray. I also cannot access the configuration for Hybrid SLI as described here. All I've got when accessing power options is the alternative power plans.The NVIDIA control panel doesn't mention anything about it. I have updated to the latest Geforce driver (Forceware 179.82).
As far as I know, my hardware is able to run Hybrid: a 9400M G graphics card with 256MB, and Vista 64. does anybody know what can be wrong, of what I could be missing? I have searched the forums and the web without success. Thanks in advance.
Cheers,
Guillermo
Responses (7)
Solutions (0)
Silicon_Hitman
7 Posts
1294
1
Posted November 24th, 2009 15:00
Hello,
After looking into this in great depth, I've found this here under registry (run regedit to change it)
HKEY_LOCAL_MACHINE\SOFTWARE\NVIDIA Corporation\Global\Hybrid
HidePowerSetting 0x00000001 which gives you a vaule of 1.
I set it to a value of 0 (0x00000000), restart the system and it's now working.
Stephen
Guillermo,
Even i'm having the same problem. I tried reinstalling too but without any success. And in the later part of the post, it is being said that reinstalling vista might help. Can you tell me which driver is the main one that needs to be reinstalled?
And in the later part of the post, it is being said that reinstalling vista might help. Can you tell me which driver is the main one that needs to be reinstalled? I'm sorry, but I was never able to solve this! Now I'm running Windows 7, and I have no idea if the problem was solved with the upgrade. I will have to check. I had forgotten about this...
Silicon_Hitman
7 Posts
1294
0
Posted February 11th, 2010 08:00
I'm not too sure what you mean. If you've installed the lastest drivers off the website with either Windows 7 or Vista, all you need to do is that registry fix I posted earlier and that should get SLI to work. Just need to make sure it's running off the power and it will enable itself.
- Wills out
Silicon_Hitman
7 Posts
1294
0
Posted February 12th, 2010 01:00
Are you using the drivers on the Dell site? You didn't make much sense prevousily... What version of Windows (32-bit or 64-bit). I'm using Windows 7 64-bit, and I'm running the A09 Drivers. Still had do the fix I mentioned after the driver install.
You may want to uninstall all your drivers (including chipset) and start again. A complete reinstall of Windows I don't think will be needed though...
- Wills out

Silicon_Hitman
7 Posts
1294
0
Posted November 24th, 2009 14:00
Hello,
Doesn't work for me either, but I've managed to get it to pop up an "!" mark on the icon on the tool bar. Run the Windows Experience Index (right click on 'computer' within the start button and click properties) and the examination mark will appear, when you click on it, it will bring up a box saying "do you want to enable performance mode"...
I'm guessing this isn't the right way to do it, but the only way I've found, I'll keep post again once I've got it fixed.
BTW, I'm running Windows 7 64-bit.
Stephen
BTW, check this thread, I've just read this one and it seems to be a driver issue, where the latest drivers don't have the up to date power plans. http://en.community.dell.com/forums/p/19276228/19490975.aspx#19490975 But this is for Vista, so I don't think the first A1 version will work as the Windows 7 one is A9.