UNSOLVED

Manderijn

updated

23 years ago

Closed

M

Manderijn

4 Posts

0

7423

November 28th, 2003 12:00

Display setting for a TV

When I connect my TV to my 5100 and want to enable the settings.

I follow the steps in the owner's manual.

Display settings

Settings tab, advanced. Then appears my problem, because there is no tab with display where I can put the TV button to enable my television

Please advise me how to solve this problem

  • Rollie_R

    2 Intern

    •

    2248 Posts

    518

    0

    Posted December 1st, 2003 19:00

    Manderjin,

    Thank you for using the Dell Community Forum.

    Please download and install the latest video drivers from our website.  If there is no option to choose the TV on the display tab, then the drivers are not correctly installed.  You may need to uninstall the old drivers from Add/Remove Programs in the Control Panel.

     

  • Manderijn

    4 Posts

    518

    0

    Posted December 1st, 2003 19:00

    Thankyou for replying,

    I've solved this problem, but then I'm facing the next problem. TV is not connected. There is a lot to read on this forum, but I didn't found anything wich solved my problem.

    The cables are connected well, the sound is coming trough to the TV.

    Any suggestions??

    Thanks anyway

  • Rollie_R

    2 Intern

    •

    2248 Posts

    518

    0

    Posted December 2nd, 2003 14:00

    Manderjin,

    I am not sure that I understand your question. 

    S-video and composite video are video only, the cable does not carry sound.  If you want sound to go through your TV, then you will have to connect the headphone jack to the Audio in on your TV.

     

  • khdung

    8 Posts

    518

    0

    Posted December 2nd, 2003 14:00

    I think I have the same problem with you.

    The cables (between my 5100 and my TV) are well connected but in the ATI Displays tab, it is always not connected in the TV rectangle.

    If you solve this problem, could you tell me how to do, thanks.

    Any other suggestions? Thanks in advance.

    khdung.

  • Manderijn

    4 Posts

    518

    0

    Posted December 2nd, 2003 19:00

    Thanks,

    I've one cable for sound and image which splits to sound and s-video at one end. So the sound is coming through but not the image part from the s-video port.

    That the sound is coming through tells me for sure that the connection between 5100 and TV is well.

    Any suggestions to solve the s-video part, it sais not connected in the ATI properties.