
Solved!
Go to SolutionDell XPS L702x - problem with spacebar
I own the Dell XPS l702x for a couple of days now. Although it's a great laptop I find behavior of spacebar quite annoying. If I don't hit the button straight in the middle it will not work. Left / right / bottom edges remain dead - no matter how hard I hit one of these edges, nothing will happen on the screen. I do consider it as a keyboard flaw, but is it a standard for this laptop or shall I issue a complain and ask for keyboard replacement?
I also have the Dell Latitude E5500. Its keyboard is different than the one used in l702x and I have no problems with dead button edges.
Responses (4)
Solutions (0)
W33DAW, I to have the Dell XPS L702X machine. I also have a problem with the space bar. The functionality of it is fine...however the space bar alone is very noisy and clanky when pressed. All the other keys are quiet but the space bar is just annoyingly loud. I have an older Dell Desktop which also had the same problem with the space bar key. For a Desktop it's a simple fix....(use a different Keyboard) ... However for the laptop, it's not that easy unless one is content with using a usb keyboard, which I am not.
Let me know if you get anywhere with dell on your issue.
Thanks for the post and Good luck!
Hi WHATSIT,
Before I bought L702x laptop I've read at least 1k posts on various forums. The problem you're describing - noisy spacebar that is, seems to be a common issue in this model. Unfortunately, there is't much we can do about it... and it is quite noisy indeed, but I've got used to it already.
By the way, I've managed to fix the dead areas problem. :emotion-11: It was a matter of the way spacebar was attached to the board. After small adjustments all problems have disappeared.:emotion-21:

Duke1UP
9 Posts
4340
1
Posted December 24th, 2011 14:00
First I'd watched a few youtube videos before I even tried. The one I put below seems to show the method in the most accurate way (don't be alarmed by the age of this guy - he knows what he's doing :emotion-1: )
Ok, in my case it was this filament you can see at the bottom of the spacebar. It was slightly twisted and this was enough to make some areas inactive. After straightening it works fine now.