
UNSOLVED
Dell XPS 15 (9530) - Unable to boot using AHCI
Yesterday i got my new XPS 15 9530, that's where i ran into some problems.
Laptop is unable to work under AHCI in any possible configuration.
It ships with 32GB SSD + 1TB HDD, i unscrew and swapped the 1TB HDD with a new Samsung 850 Pro 512GB. I started installing windows while on Intel's SRT (raid), then i noticed it and after installation was over i changed to AHCI.
Then i had to re-install, i boot using windows disk (talking about 8.1 pro) and windows installer was slow during this period... then after i reached the drive listing, i couldn`t touch either drivers. I couldn`t create partition in the samsung pro, i was receiving the 0x80070057 and a couple errors more of the same type. I started playing around with the GPT & MBR formatting, used external computer to create partitions, layouts but nothing.
Whenever AHCI is on, i can`t manage to work using the Samsung 850 Pro disk.
So now i`m using Intel's SRT (raid instead) while having a single disk (samsung 850 pro) where windows is installed, while not achieving full read/write speeds because of the samsung magician that has to work with AHCI, and the Intel Rapid Storage Technology (irst). The other drive (32GB SSD) is formatted for linux, i have to disable secure boot to boot into there but that's fine.
How can i get AHCI to work? I tried so many ways but clearly nothing....
Advice is welcomed :)
Thanks!
Responses (15)
Solutions (0)
As i said, i re-tested without any luck:
Unscrew laptop, removed mSata and ssd, took an image backup of the samsung ssd and put back the ssd only in the machine.
Booted into BIOS, changed mode IRST to AHCI, saved, and booted from the USB stick.
The dots starting spinning around with the windows 8 logo, and after that a black screen, anytime soon it will show the welcome to windows installation wizard, but it takes ages....
As soon as i reach that point, i`ll try to load rapid storage drivers (f6) method, let's see...
carlitos.com
2 Posts
3074
0
Posted December 18th, 2014 14:00
1. install the original HDD back
2 - starts normally
3 - active and updated dell backup and recovery software
4 - creates a backup copy on a usb (factory recovery) includes drivers and operating system
5 - download software for samsung evo to clone your hard drive to your ssd will need a usb adapter for your ssd
now you can change your hard drive and start normally if you have a problem booting try one more time or change the configuration on bios to Intel Smart response or AHCI if doesnt work boot with your USB (factory recovery) erase everything and install a new system with your usb
note: maybe not work intel smart response that is only functional if you have your system in hdd don't worry not is necessary because your system is much more faster than the technology
Note: maybe not work inter rapid star may have to reconfigure
I have the same computer and Works excellent...
good luck

Voovode
11 Posts
3043
0
Posted November 7th, 2014 12:00
Anyone?