UNSOLVED

jpetrocy

updated

21 years ago

Closed

J

jpetrocy

3 Posts

0

29276

February 3rd, 2006 00:00

D600 screen blanking out after XP logo appears

Ok, follow me on this one...
 
XP-SP2 that lives in a dock at work and spends the time at home undocked
 
I came home two days ago, turned it on, the thing boots, comes up the the windows logo, then right before it would dip to display the login, the screen dumps to black as if the video signal was lost to the screen.
 
It works fine in the dock, it works fine with a monitor plugged into the external video port, it works fine if I boot into VGA mode or safe mode. It actually will work just fine as long as the ATI driver is not loaded (meaning the default windows generic VGA driver loads.)
 
I have tried everything from blowing away hardware profiles, to rolling the drivers back, to reinstalling the drivers (a few times.)
 
This is REALLY annoying. I hadn't installed anything, I have run a full virus scan, and a full spyware scan. I ran the Dell crash analysis tool.. nothing. I ran the system diag (holding the function key at boot) nothing.
 
I can even re-adjust the display size and color depth when not using the ATI driver, but with loaded using VGA mode and changing the screen resolution and color depth will both blank the monitor out.
 
Ideas? I am just done.
 
-J
  • leec110

    5 Posts

    541

    0

    Posted February 3rd, 2006 16:00

    Hi

    I have a similar problem with 3 of our d600s in that this occurs connecting to a projector. The problem started with windows update automatically updating video driver. I have also downloaded the latest driver from dell and bios update A16. This cured one of the 3 but having logged the call with dell support I was advised to reinstall an older driver. This cured the problem on one of the two remaining but only lasted 2 days before reverting back to the original problem. Call is still open as they are looking into it for me. I can tell you that my fault is simply that the adapter will only display at 60hz and not the 85hz required.

    It may be worth you checking the windows update setting as you may get away with using system restore and preventing a reoccurence before your problem escalates to the same scale as mine.

    Lee

  • jpetrocy

    3 Posts

    541

    0

    Posted February 3rd, 2006 18:00

    I have tried the system restore, driver roll back, and am running DIOS A16.

    So we are on a similar page here.

    Dell phone support, here I come.

    -JWP

  • DTE Joe

    1 Message

    541

    0

    Posted February 8th, 2006 13:00

    I was having he same problem as J but on a D610.  I re-installed the driver from the "Drivers and Utilities" CD that came with the laptop.  It told me it was older version but I loaded it anyway.  Seems to have fixed the problem.
  • Norm W.

    21 Posts

    541

    0

    Posted February 9th, 2006 22:00

    Hi Jpetrocy,

     

    Myself and another user have the exact same issue with Inspiron laptops.

    It is so frustrating.   Did dell support solve it for you?  If so how?

    Do you have the support tech's name and contact info.

    It has got to be some sort of a driver/video card interrupt problem.

     

    Thanks for your help!!

     

    Norm

     

  • jpetrocy

    3 Posts

    541

    0

    Posted February 9th, 2006 23:00

    No.  They haven't gotten back with me.
     
    I was premier access certified up until about 2 years ago... not really something I need to do these days... but I miss being able to skip level 1 and move up the food chain to an engineer... particularly since I am still using the default VGA driver just so I can work at home.
     
    There was supposed to be an email or phone call within 48 business hours... a week later... nothing.
     
    I will spare you any rant... just know I am still waiting and a phone call to support is coming tomorrow morning and the university's dell rep is going to get an earful.
     
    -J
  • Norm W.

    21 Posts

    541

    0

    Posted February 11th, 2006 19:00

    Hi

    Tons of people have this problem.  It is all over the dell forum site and google.

    I think I found my problem.  After 3 calls to dell tech hardware suppport, and no solutions from them.

    I found a guy on google who suggested checking the reed switch on the keyboard.  Mine is about 1 inch from my power button.  It is about the size of a paper clip width.  Uusally grey plastic and it sticks up about 1/4" above the keyboard.  When you close the lid, the reed is depressed and the pc knows to go into standby/suspend mode.   My reed is crooked and jammed in the hole.  So, the pc thinks it should be in standby mode all the time.   The driver is not loaded when you safe boot.  So, the screen works.

    Dell is coming to repair it, with my hardware warranty.  I believe you can repair/unjam it yourself checkout the dell service manual if you want.

    Apparently, this is happening to a lot of Dell laptops all models.  I'm surprised Dell didn't have it in their troubleshooting sequence.  I'm hoping this is will fix my problem.  I'll know next week. I'm pretty sure.  Norm

  • Norm W.

    21 Posts

    541

    0

    Posted February 11th, 2006 19:00

    Hi,

    tons of people have this problem.  It is all over the dell forum site and google.

    I think I found my problem.  After 3 calls to dell tech hardware suppport, and no solutions from them.

    I found a guy on google who suggested checking the reed switch on the keyboard.  Mine is about 1 inch from my power button.  It is about the size of a paper clip width.  Uusally grey plastic and it sticks up about 1/4" above the keyboard.  When you close the lid, the reed is depressed and the pc knows to go into standby/suspend mode.   My reed is crooked and jammed in the hole.  So, the pc thinks it should be in standby mode all the time.   The driver is not loaded when you safe boot.  So, the screen works.

    Dell is coming to repair it, with my hardware warranty.  I believe you can repair/unjam it yourself checkout the dell servicemanual if you want.

    Apparently, this is happening to a lot of Dell laptops all models.  I'm surprised Dell didn't have it in their troubleshooting sequence.  I'm hoping this is will fix my problem.  I'll know next week. I'm pretty sure.  

     

    Norm

  • Norm W.

    21 Posts

    541

    0

    Posted February 11th, 2006 19:00

    Hi

    tons of people have this problem.  It is all over the dell forum site and google.

    I think I found my problem.  After 3 calls to dell tech hardware suppport, and no solutions from them.

    I found a guy on google who suggested checking the reed switch on the keyboard.  Mine is about 1 inch from my power button.  It is about the size of a paper clip width.  Uusally grey plastic and it sticks up about 1/4" above the keyboard.  When you close the lid, the reed is depressed and the pc knows to go into standby/suspend mode.   My reed is crooked and jammed in the hole.  So, the pc thinks it should be in standby mode all the time.   The driver is not loaded when you safe boot.  So, the screen works.

    Dell is coming to repair it, with my hardware warranty.  I believe you can repair/unjam it yourself checkout the dell service manual if you want.

    Apparently, this is happening to a lot of Dell laptops all models.  I'm surprised Dell didn't have it in their troubleshooting sequence.  I'm hoping this is will fix my problem.  I'll know next week. I'm pretty sure.  Norm

  • leec110

    5 Posts

    541

    0

    Posted February 24th, 2006 21:00

    Thought I'd update you with my problem that may help you out.

    I have reflashed the bios back to A05 from the link below. Uninstalled the video adapter and reinstalled the A03 version from Dell supports other versions.

    Nothing altered until I rebooted the laptop again and reentered the bios. This time i pressed Alt + F which reset the bios back to the original factory settings and started up and all was back to normal.

    I have now succesfully reflashed back to A16 without losing the settings. Still undecided wether to update video driver. Learnt my lesson that if it works don't try to fix it.

    http://www.bay-wolf.com/bios/d600a05.zip

  • Loth

    20 Posts

    77

    0

    Posted March 15th, 2006 06:00

    Have seen something a little similar which just required the press of the Fn and F8 key I think?
     
    the one to switch between LCD and External monitor.. can't remember exactly what it says off the top of my head