
UNSOLVED
D
daylily_ny
12 Posts
0
30769
October 4th, 2009 17:00
CD/DVD not working - Inspiron 8200
When i go into my computer, the D: drive does show BUT when I insert any disk, none of the files on that CD will show.When I went into Device Manager, it says the drive is working. I go to My Computer, click on the drive letter D: and then open Explore and still no files will show. When you insert a disk into the drive, you can hear it running but then just stops and nothing appears. I've tried audio disk,, several CD's with files on them but no luck getting anything to happen. Any other ideas on what to check to see if the drive is really "dead" or is something else preventing the files from being able to show? I've been trying to reinstall Microsoft Office Professional but since the drive isn't working to read the cd, I'm stuck.
I checked my computer under the HELP and SUPPORT area for installed hardware and under the CD-ROM Drive (D:) it says it is a SONY CD-RW CRX810E. The outside of the drive says DVD. If I need to replace the drive, what is compatible to install on the INSPIRON 8200? It is an old laptop but works fine for most of what I need to do.
Thanks for any help you can provide.
Julia
Responses (14)
Solutions (0)
It could be dead. Not unusual for that old of a laptop. First go into device manager and uninstall the drive. Reboot and let window reinstall the driver. If that does not fix it you might try running a CD drive cleaner disk.
Run the dell diagnostic on it. If it fails then you need a new drive. Can get them for good price on ebay and should be easy to swap out.
daylily_ny
12 Posts
621
0
Posted October 4th, 2009 18:00
I already did the uninstall of the drive and the computer did recognize it and reinstalled it when I rebooted. I also checked for any updated drivers and bios. I'll try the CD drive cleaner disk. Haven't tried the Dell diagnostic and will do that next.
Julia
daylily_ny
12 Posts
624
0
Posted October 5th, 2009 09:00
Rick:
Thanks for the link but the CD Rom D: drive is showing in the Device Manager (no error codes or exclamation point) and according to Device Manager it is working. Checked to see if the Upper and Lower filters were in the registry and they are not there.
Ran Dell diagnostics on the computer and still no solution to my problem. Trying to find CD ROM disk cleaner to see if that would help.
Does anyone know what should be listed in the registry(right side of frame) for the CD ROM under the key {4D36E965-E325-11CE-BFC1-08002BE10318}? I want to be sure all the right things are showing and something isn't missing or something wasn't added which is causing the problem.
Thanks again,
Julia
daylily_ny
12 Posts
624
0
Posted October 6th, 2009 14:00
Thought to come back and post the results with the disk cleaner. Still not able to read the files on the cd or any cd I put into the drive. Tried the cleaner twice.
The drive runs when you place a cd in the drive and then after about 1 minute or so it stops. Still no files showing when I have the cd in the drive and view the D: drive in either MY COMPUTER or use the Run.If I click on eject, it ejects the cd from the cd rom drive. Any other thoughts on what to try?
Julia
Julia,
It appears the drive is dead. It is very easy to replace and a new CD/DVD drive is affordable on Ebay. Here is a link to several DVD writer combo drives on Ebay:
http://computers.shop.ebay.com/i.html?_nkw=inspiron+8200&_sacat=131543&_trksid=p3286.m270.l1313&Brand=Dell&_dmpt=PCC_Drives_Storage_Internal&_odkw=inspiron+2200&_osacat=131543 This is the correct link the first one I posted was wrong. Sorry
Here is the link on how to swap out the DVD drive in the Dell service manual:
http://support.dell.com/support/edocs/systems/ins8200/en/sm_en/hdd.htm#1084976
Basically remove one little lock screw pull the tab on the drive and it slides out. Hope htis helps.
Julia,
This is the correct Ebay link for the drives. Sorry
daylily_ny
12 Posts
624
0
Posted October 6th, 2009 16:00
Thanks for the info on Ebay.
Not sure whether to start a new post but when I followed the link to the site for swapping out the old for the new drive, it doesn't say anything about replacing the drive only taking the old optical drive one out. Is there more to do? When I replace with the new combo drive and power up, will the computer recognize the new drive or is there more to do after putting the new drive in? A bit confused on inserting the new drive. Old drive removal looks simple enough but not sure about the next steps. Thanks for the help.
Julia

PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
621
0
Posted October 4th, 2009 18:00
Julia,
Just a hunch. Did you try this?
How to Fix Error Code 39 with DVD or CD-ROM drive in Windows XP/Vista
Rick