
UNSOLVED
Closed
Can't get old hard drive to work in new M1330 - can anyone help?
Hi,
My dell m1330 with vista home premium (32 bit) blew up (yes, blew up - smoke from power supply transformer). Dell have sent me a replacement one which boots up fine, but I'm trying to get the old hard drive in my dead laptop to work in my new one (its better - western digital, 320gb 7200rpm). When I boot up with it in, I get the BSOD which says:
a problem has been detected... tech info: STOP: 0x0000007B (0xC958ABB0, 0xC0000034, 0x00000000, 0x00000000)
When I run the windows dvd to repair, it says it can't repair with th following error:
Root cause found:
Unspecified changes to system configuration might have caused the problem.
Repair action: System files integrity check and repair
Result: Failed. Error code = 0x490
Time taken= 275935ms
All checks before this error pass. Safe mode brings the same error. When I run dell diagnostics, I get this error:
error code 0147
msg: error code 2000-0147
msg: unit 0: optical drive BIST - OPU test failed
while all other checks pass (I guess this is an unrelated dvd drive issue).
I've tried a few things - chkdsk on my c partition - no errors, fixmbr etc.
Does anyone have any suggetions other than reformatting? Although the replacement laptop was identical in tech spec to my old one, could there have been any differences in the setup that's causing it? Anything I can try tweaking in BIOS? I tried contacting Dell for help, they just said reformat.
Any suggestions would be much appreciated, thanks
Sachin
Responses (5)
Solutions (0)
Hey guys, thanks 4 the replies - I figured it out eventually - I had to set the drive from ACHI to ATA in BIOS.. that was all! Oh god I hope someday computers pay for all the pain they cause.
The hard drive itself is fine as it passes chkdsk ok. Phew!
Thanks again guys,
Sachin
TheRealFireblad
4 Apprentice
•
4639 Posts
392
0
Posted January 20th, 2009 00:00
I'm sure the ACHI - ATA BIOS option would've been the next suggestion you got, but it's always better when you find out the problem, and solve it yourself!
Well done you :emotion-21:
er ahhh i can;t take credit for it, someone else suggested it. i am very annoyed with dell though - i asked the guy in technical help whether or not it could be something in the bios that needed tweaking. he promised me unreservedly that it was nothing to do with that - i dont mind if someone cant help, i do however mind if they "unhelp" me!
still dell have always been good to me before so i still have some love for them.

TheRealFireblad
4 Apprentice
•
4639 Posts
392
0
Posted January 19th, 2009 10:00
Welcome to the forums Sachin :emotion-21:
Unfortunately... even if the replacement laptop has exactly the same hardware in it as the one which blew up, it doesn't mean you can just swap-out the hard drive from the 'old' system, and it'll work in the 'new' one.
Since it doesn't, you'll need to stick the 320GB WD drive in either an external enclosure - or install it as a slave drive in a desktop system, to get all your important files off it.
You can then fit it in the 'new' laptop, but you'll need to boot from the OS disc, reformat it, and do a 'clean' install.
If the old HDD still has the 'Recovery' partition on it, and you have the means by which to image the drive, you would then be able to re-image the new drive, with the image of the old drive.
But again... it's not guaranteed to work? You could end up with exactly the same problems you're having now, because... in effect... you'd be using the 'old' drive'?
That's not what you wanted to hear, I know... but there's nothing else you can do. Such are the 'joys' of computers :emotion-43: