
UNSOLVED
Closed
bluetooth?
The other day I tried for ages to let my mobile phone communicate with my notebook computer (Latitude X1) via bluetooth, without any luck. I came to the conclusion that
probably I don't have the hardware (card?) installed on the laptop, even though I do have the software (Toshiba stack or something). I really would like to use the bluetooth and thought I had ordered it with the laptop. How can I find out for sure whether or not the hardware has been installed on this laptop, and if not, can I make an appointment a Dell technician to come and install it? (I wouldn't dream of trying to do this myself...)
Responses (6)
Solutions (0)
Art - thanks for the detailed reply! However, this morning I spent about an hour on the phone with somebody from the 'Dell Gold Service Helpdesk' or something similar, and he couldn't solve it either. After uninstalling and reinstalling the bluetooth stack on his instructions (which I had already tried myself as well, without any luck), he concluded that the bluetooth card had to be in some way faulty because it wasn't transmitting any signal, even though it could receive the signal from the mobile phone.
The bottom line is that a technician from Dell will in fact be coming in tomorrow to install a new card (apparently I'm entitled to this because of this 'Gold Service' agreement). So that's good news - it should work after that!
Montythemooch
16 Posts
259
0
Posted November 16th, 2005 23:00
Art,
I tried updating the Truemobile 350 firmware on my X1 using the above link. Unfortunately, the Bluetooth Stack setup has been running for close to a hour now and is stuck at 63%. It hiccups every so often and pops up the unsigned driver dialog box, but it flashes up so fast it's near impossible to click on it. Managing to finally click on it does absolutely no good.- The "Unsigned Driver" Flash is normal, Dell supresses those so that you do not have to deal
with clicking "Install anyway" for each instance, this would be true for a great many
drivers that would be normal to install and you must 'trust' the driver supplier and
install them without MS Blessings.
Your "Hang" on the Dell Toshiba is due to a MS Driver in there controling your Bluetooth
making it impossible for the new Stack to 'see' Bluetooth on your system.
"How to remove Bluetooth wireless device support in Windows XP Service Pack 2 {Link HERE}
SUMMARY
This article discusses how to remove Bluetooth wireless device support from Microsoft Windows XP Service Pack 2 (SP2).
MORE INFORMATION
By default, Windows XP SP2 installs Bluetooth wireless device support when you install Windows XP SP2 to a computer.
After installation, if a Bluetooth wireless device or radio is detected,
Device Manager will install the driver for the Bluetooth device.
...
This will prevent the Microsoft Bluetooth Stack from loading.
However, this does not prevent third-party Bluetooth stacks from being installed or loaded. ..."
Also check ControlPanel; Add and Remove to assure that no Dell Bluetooth (or any other)
remain prior to starting a new Stack/Driver install.
It should not take an hour, but there were problems in the past when a "ReBoot request" popped
up prior to the completion of the firmware flash (covering the "please wait") and people
corrupted the Flash by an early re-boot.
You can find an article in Dell Knowledge Base dealing with that.Message Edited by Art on 11-16-2005 11:34 PM
- Perhaps this could solve my problem as well? (Not sure though). Because, the Dell technician did show up very nicely on time with a new Bluetooth card, but he STILL couldn't get my moibile phone to detect the laptop and vice versa! The phone DOES detect, and communicate well, with another laptop in the house. So his conclusion was that it's something about the phone (Motorola), because also this laptop could communicate well with his own mobile phone. But apparently it only detected my phone as a modem or something, and not as a bluetooth mobile phone... All very complicated! For now I;ve just decided to accept that this particular laptop is not going to work with this particular mobile - hopefully it will work if and when I get another mobile.
- Not sure how up-to-date this is for the TM350, but notice the difference
Bluetooth Profiles Supported {Link HERE} between older and newer Dell BT.
Serial Port is one that is needed for my work.
Don't give up, as Dell is continously updating, one last week and another new
one this week, including firmware!
Each of these new releases should support more devices.
Toshiba is noted for supporting Audio and Phones, would think that ALL DEVICES
would be supported by ALL STACKS, and it is further complicated by license and
copyright limitations and those can only be dealt with by the OEM's.

Art
2 Intern
•
1513 Posts
259
0
Posted November 13th, 2005 15:00
would also be equipped with the hardware.
Check your BIOS Setup (tap F2 on first screen on bootup) and it should show if it is installed
as well as allow you to enable or set how to turn it on (usually Fn/F2 or through Dell QuickSet).
No idea of how to get Dell to "...make an appointment a Dell technician to come and install it? ..."
But most important fact would be to not let anyone cripple you with a USB 'dongle' version of Bluetooth.
Dell™ Latitude™ X1 Service Manual {Link HERE}
The above shows how it would be done, you might call Dell Spare Parts at 1(800)372-3355 or 449-3355
and see if you could order a "replacement" BT Card (and arrange an install).
Should you discover that your BT is already installed, Dell has just released a new Stack/Driver for it.
Dell Wireless 350 Bluetooth Internal Module, Driver, Windows 2000, Windows XP, English, Multi System,
v.v3.03.02D, A00 Release Date: 11/10/2005
It would be important to first remove an existing BT Stack (use CP Add/Remove) Prior to installing
a new one.