UNSOLVED

sayguh

updated

19 years ago

Closed

S

sayguh

21 Posts

0

2360

August 24th, 2007 13:00

Batery stays at 6%

So my roommate dumped a glass of water on his Inspiron 8500 which killed it. I opened it up, cleaned it pretty well, and put it back together. It worked just fine. So I started it up and noticed the AC power cord was missing, so instead of searching his room i checked my power cord online and noticed that both our power cords output the same voltage. And my power cord (I have an inspiron 5150) fits in his slot. So i plugged it in. The screen flickered a few times and didn't seem too happy and the computer recognized it was charging. So here's the problem, b/c of the flickering i unplugged it, and when he got home got him to get his. Now the battery is at 6% and doesn't go down at all with the AC adaptor plugged in, but it also doesn't go up at all. If I take the battery out, the computer turns off, even when I leave the AC cord plugged in. So, did I break something when I used my power cord in his computer? Or is this just more issues resulting from the water spill? I wouldn't mind it so much but i can't do certain things like defrag b/c it thinks the battery is low. And I can't update the bios b/c it says I must have both battery and AC adaptor plugged in and I do but it does not recognize itself as charging. I've tried taking out the battery and unplugging it and pressing the power button 10x and then once more for 30 seconds to drain the capacitors, and that didn't work. I've looked in the bios and the bios says the battery is at 6% and draining even with the AC cord plugged in. Lemme know what you think, if i don't get any good answers I might just crack it all back open and see if I burned something out.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    251

    0

    Posted August 24th, 2007 17:00

    You've fried the power circuitry on the system board.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    251

    0

    Posted August 24th, 2007 18:00

    Unless you can black-box it - you'll never find a schematic - the only solution is to replace the board.
  • sayguh

    21 Posts

    251

    0

    Posted August 24th, 2007 18:00

    So I imagine then the battery is still good, but the circuitry that detects the battery charge is dead. Is there anyway to fix this? Any points I can short or solder? Anything i can do to maybe even just trick it into thinking the battery is full all the time? Or what about a software fix? There has to be something to stop windows from thinking it has an empty battery.
  • Flat Cat

    11 Posts

    251

    0

    Posted September 17th, 2007 12:00

    It seems odd that it will run off the battery. If you had fried the power circuit, it wouldn't run at all I would have thought.
     
    A couple of things spring to mind;
     
    (1) the DC power jack is worn and not making good contact (your other power cord may have done this). Try rotating the power connector in the DC jack slightly and see if the charging symbol appears.
     
    (2) the AC adapter recognition circuit built into the adapter or the recognition circuit in the computer has got fried. Can you try someone else's adapter (same model) to see if that charges the battery.