UNSOLVED

Kaisersosay

updated

23 years ago

Closed

K

Kaisersosay

12 Posts

•

8 Points

0

6246

July 10th, 2003 22:00

2 different 3d benchmarks on same system depending on rebooting?

Hail,

  I recently installed the ATI Radeon 9000 on my inspiron8100 and have noticed a nice boost in speed over the old geforce 2 go card. However, I have noticed that sometimes EQ plays real slow, like at geforce 2 speeds and i quit out the game, run 3dbenchmark 2001 and get about 1500. I reboot the computer and get 5500 again and
EQ runs fine again. Fortunately I dont have to run the whole 3dbenchmark since i hit 100fps in the first test when I have good speed and am at 10 fps at poor speed. I suspect this is a driver issue and am using the latest dell driver 6.14.10.6356  (aka ?r61557). I tried to install the latest ATI catalyst driver but get the nfo file not found error because I am installing on an i8100 not, the i8200. I think i can manually update the driver but was just posting for any other suggestions since the speed is good after a reboot.

 

Thanks

 

Dave

  • Rance485

    2 Intern

    •

    298 Posts

    673

    0

    Posted July 11th, 2003 11:00

    Kaisersosay:

    What Operating System are you using? Try this: click Start then Run, type MSCONFIG and click OK. The System Configuration Editor allows you to choose what loads as the system boots. Choose Selective Startup and remove all checks from the boxes, then click OK. When prompted to restart choose Yes. If this solves the problem, start inserting checks one at a time and then restarting to see if the problem reappears. In this manner you may be able to isolate the cause of the problem.

     

  • Kaisersosay

    12 Posts

    •

    8 Points

    673

    0

    Posted July 11th, 2003 23:00

    Hi,

     I am using Win XP. I periodically use msconfig to clear out trash from my system tray. I think most of what I have there now is essential programs for me. I will take another look tho. I also use ad aware to clear out the adserver startup tasks.

       I am really not sure why this seems to only be an intermittent problem that is cleared by system reboot. I can set a system restore and try the ATI latest driver. I know I get the missing .nfo file if i use the native ATI installer but I could just do update driver and point to my ATI directory and see?  I know I did this in the past with the old nvidia ge2 driver for my original dell card and squeezed out about a 25% boost in 3d score. However, once I am used to seeing 3d scores of 5500, its like going back from cable to phone isp when I get scores of 1500. If the startup folder clean out doesn't work do you have any other suggestions?

     

    Thanks

     

    Dave

  • Rance485

    2 Intern

    •

    298 Posts

    673

    0

    Posted July 14th, 2003 11:00

    Kaisersosay:

    Considering you began experiencing the problem shortly after installing the ATI video adapter, you may want to try reinstalling the original video card and see if the problem persists. If the problem is as intermittent as you have stated, and you have already tried updating the system's BIOS and video driver, I would recommend performing a complete Operating System reinstallation. Only by doing this can we rule out software conflict or corruption.

     

  • Kaisersosay

    12 Posts

    •

    8 Points

    673

    0

    Posted July 15th, 2003 12:00

    Hi,

     

     I have installed the catalyst drivers for the ati radeon in place of the specific dell mobility driver for the ati9000. I get roughly the same speeds on 3d benchmark. I did have the slowdown occur once so far. I did some research on the net and suspect the problem to be the em_exec driver installed by logitech cordless mouse. Some have reported it to eat up huge cpu times and cause general system slowdown. I do have problems with the mouse not always being recognized appropriately despite the latest drivers. I will experiment with a plain old microsoft optimouse and see.

     

    Thanks for your help

     

    Kai

  • Kaisersosay

    12 Posts

    •

    8 Points

    673

    0

    Posted March 30th, 2004 11:00

    Hi,

     

     Wow, found this old post. Solved the problem after multiple upgrades of video card, ram, hard drive, OS.   Was a bad heatsink. Dell returned the computer within 3 days and it has been working great. Just wanted to post nice service there

     

    Cheers

     

    Kai