
Solved!
Go to SolutionXPS One 24 USB Ports Not Working
I'm working on this for a friend, none of the USB ports are working. It doesn't recognize a wired or wireless mouse/keyboard but boots to Windows without error. Obviously I can't get into the setup to see if ports were disabled. Any suggestions? Bad motherboard?
Responses (11)
Solutions (0)
I don't understand...
The mouse and keyboard should be connected through the powered hub the first time you boot with the hub connected .
So please explain what you mean "once the hub is connected the lights on mouse and keyboard cut off."
Yeah I had them connected at boot. My mouse glows blue so once Windows is loaded the mouse isnt glowing. If I unplug
the powered hub from the computer the mouse starts glowing. (Turns on). I power cycled the computer with the hub plugged in to each USB with the same results.
I still don't think you're doing this right! :emotion-7:
If you disconnect the powered hub, the mouse should be disconnected too. The mouse and keyboard should be connected through the externally powered hub, not directly to the PC.
You want the powered hub to be powering the mouse and keyboard for the first round to see if you can get USB devices to start working again.

RoHe
12 Elder
•
45230 Posts
•
172625 Points
486
1
Posted April 3rd, 2013 14:00
Before going for a new motherboard, maybe this will work. It has worked for other systems...
Assuming both keyboard and mouse now work when connected directly to the PC, power off and disconnect the hub from the PC and reboot again. If you're lucky, both will work now without the hub. But if they only work when connected through the powered hub, you have a relatively less expensive work-around.
Not sure this is the right board (refurbished), but check it out. And you can always call Dell Spare Parts.