UNSOLVED

ageless01

updated

19 years ago

A

ageless01

28 Posts

0

36894

February 18th, 2008 18:00

xps 720H2C problems from Day 1

I bought my 720H2C around mid Nov 07 and have had problems with it from day 1.

Here are my particulars:

 

Mother board 680i SLI

Core 2 Extreme QX6800 set at 2.93 GHZ (original factory at 3.73 proved highly unstable BSOD's)

1000 watt PSU

cosair 4 gig DDR2  SDRAMmem 800mhz factory oc to 1066

dual nVidia 8800 ultra 768mb (driver version 169.12)

X-Fi extreme fidelity

DELL 2407WFP 24''

2x Blu-Ray DVD+RW, CD RW Drive

SATA Raid 0 dual 160GB 10k rpm

WD, Raptor 160GB NCQ 10k SATA hard drive

Windows XP media edition 32 bit

 

Updates:

BIOS A05

BIOS clock speed reset to 2.93

nVidia smbus update

nVidia chipset update A06

nVidia nTune installed

SLI is enabled

 

 

1. Frequent crashes to desktop on all games.

2. Generic host crashes

3. Fans not reving up properly upon CPU or GPU's heating up.

4. Fan speeds once adjusted via nTune tend to run amok even after temps go down. (CPU fan 66% at 78F)

5. BSOD running almost anything.

 

 

When these problems started happening I reset the BIOS clock speed to 2.93

this solved the BSOD

 

Other problems still occured.

DELL technician's suggestion was to go back to factory restore as a virus probably invaded system.

 

Did that and problems still occurred.

Ran full memory diagnostics at DELL's request.

no problem detected.

 

Here is nTune display of voltages and bus speeds

 

Voltages

CPU  1.3020  (I see this flucuating from 1.13 to 1.32 at times when I monitor)

MEM 2.2162

FSB  1.2231

HT(SPP-MCP) 1.2082

PCI-E 1.4001

nForce 1.4913

 

Bus Speeds

CPU  2937.000 Mhz

FSB  1068(QDR)

MEM 1068 (DDR2)

SPP PCI-E 2500

MCP PCI-E 2500

GPU core 612

GPU mem 1080

 

I have tried to disable SLI and CTD still occur.

I have also uninstalled the video drivers and did a driver sweep and reinstalled.

 

I don't know what to try next, but from what I read in the forums I am not alone. I spent $7,000 on this suppossed extreme gamer system, and I can't play gems for more than 20 minues at a time before they wind up CTD for various reasons. Sometimes it's the video driver dll, sometimes it's the games exe, sometimes it's a memory address violation to 0xffffffff, sometimes it's msvcr80.dll which is a c++ module.

 

I really frustrated over these problems and displeased with DELL's resolutions.

to date: try going back to factory restore

            try reformat disks and re-install

 

nothing has worked. When I ask for them to send someone to look at the system, I get the "we can only send out someone once a specific problem has been identified"

 

I have spent literally days of my own time trying various suggested solutions. I'm a long standing customer of DELL and now I stand on the threshold of never buying another DELL product again. It's been a very expensive lesson.

 

Ageless (Rich Hommel)

  • Dave9

    1 Rookie

    •

    322 Posts

    1432

    0

    Posted February 20th, 2008 13:00

    delete ntunes as that seems to be a lot of problems.  Set it up the way you want it before deleting as the settings are remembered or so it seems.  I only have 2 games one being Halo2 for Vista and it no longer freezes or jerks during play.  Still have a few problems but that did away with a number of them.  Now if Creatative and Dell would fix the sound card so it doesn't lock up the computer and bluetooth would work 100% of the time I'd be happy.

  • BobT36

    206 Posts

    1432

    0

    Posted February 20th, 2008 14:00

    You're not alone mate, I got mine mid-january and although I have a slightly different spec than you, I've also been having problems since day 1, granted not as bad as yours though from what limited testing I've been able to do.

     

    Basically when I first got the comp I was getting random bluescreens to do with nv4_disp.dll just from general use, or opening the web browser and so on.

     

    I've updated the display and motherboard drivers to nvidias recommended latest and that solved the random bluescreens, however I still get a bluescreen on Medieval total war (not been able to test too deep into many other games yet) but the main problem is games won't launch with SLI mode on and spew errors such as "Cannot start 3d acceleration", dxdiag also fails the direct3d tests with SLI on, however it passes and most of my games launch with SLI switched off.

     

    I've e-mailed dell about this TWO days ago and still not received a reply, I assume all I'm going to get when they do is "Reset to factory settings" forcing me to lose all my current data and havto reinstall everything.

     

    Very poor service tbh and I'm extremely dissapointed in the lack of care taken to make sure these systems are stable and function as advertised before being shipped out as they've obviously not been tested since theyd see it was randomly producing bluescreens after a few minutes of use. Dell should definately put more priority and care into making sure systems are fit for purpose before being shipped out, (and fixing them when not) not too much to ask when I've paid £3k for the thing.

     

    Btw clicking the motherboard tab on Ntune sends the cpu fan looney until restart even if you make no changes, I've attempted no changes to the specs whatsoever so that part at least seems a bug with Ntune as when I tried it the fans just kept on going faster and faster even though nothing had been done, now uninstalled it.

     

    If you want to list some of the games that you're getting errors on I'll give them a test if I have them, I might not have but it will be interesting to see if my system fails as well, especially due to the other problems I'm having.

  • 1432

    0

    Posted February 20th, 2008 14:00

    I read you ran the Dell diag on the RAM, did you run it on the whole system? Maybe you have a bad proc or video card etc....

  • TurboShane

    148 Posts

    1432

    0

    Posted February 20th, 2008 17:00

    You can't overclock it at all? I suggest you overclock it or send it back to Dell in a few peices. You could have got the aircooled version for way less if that's the case. Did you monitor your cpu temps? Use core temp and overclock it to 1 level below 3.73 and stress test it with something like prime95 for a few minutes and report back here with your results. It would be better if you found something to stress all 4 cores at once.

  • 1432

    0

    Posted February 20th, 2008 17:00

    FYI,, is there any chance your CPU cooling device is not seated or lost proper contact with the CPU durring shipping? Maybe you need to check the heat sink compound applied to the proc? Just a shot in the dark?

  • TurboShane

    148 Posts

    1432

    0

    Posted February 20th, 2008 17:00

    Meanwhile call dell and ask to talk to the senior manager and tell them your story and that you want your whole system replaced. They will ship you a new one and you send yours back.

  • ageless01

    28 Posts

    1432

    0

    Posted February 20th, 2008 17:00

    Yes I ran diagnostics on every piece of hardware that had diagnostics for it. I ran directx diags also and nothing showed as being bad.

     

    I have removed ntune from the system and I still have problems.

    I disabled SLI for all the games and they still crash.

     

    The one thing I did see were voltage fluctuations on the CPU when I did have ntune installed. I'm not sure what the acceptable range is, but it was going from 1.18 to 1.32 at various times. The processors are not oc'd. They are at 2.93MHZ The system arrived from factory oc'd at 3.73 and was highly unstable.

     

    I'm wondering that since I have a warranty for the as delivered 3.73 I can get DELL to replace the motherboard for one that operates stable at that setting.

     

     

  • 1432

    0

    Posted February 20th, 2008 17:00

    I think that if you are persistant with Dell and explain that you bought an OCed computer and its not Ocing then you want it fixed or send it back, if they say you can't send it back tell them you are going to take them to small claims court because they failed to deliver the product you ordered. You paid big bucks for this computer and there is something wrong, or maybe a combination of things.

  • BobT36

    206 Posts

    905

    0

    Posted February 20th, 2008 18:00

    Ahh, unfortunately I've only got Medieval 2 off that list, however thats the game I do have problems with lol.

     

    Most of my other games seem to work fine with SLI OFF, (Yet still have the described problems with direct3d with it on) but in Medieval whenever I try and attack a town from the campaign map it BSODS.

     

    Not noticed any random BSODs since I first updated my drivers though, (they were happening all the time before that, when I first got my PC) Its just at that fixed point on Medieval, which one of the admins on their board seems to think something to do with the RAM has corrupted the installation.

     

    Link to Medieval topic.

     

    However as said thats just from a single specified point in that game and not randomly in any games, (hopefully) so your problems seem a lot worse than mine as at least mine seems to run ok(ish) with SLI off. :(

  • ageless01

    28 Posts

    905

    0

    Posted February 20th, 2008 18:00

    BobT36,

     

    Here is a list of games that crash.

     

    Mideival II

    Witcher v1.2

    World in Conflict patched to v1.5

    Longest Journey

    Silent Hunter IV

    Pacific fighter

     

    out of this list the only game to crash on my older pc XPS gen2 is World in Conflict.

     

    Ageless