UNSOLVED

folie

updated

18 years ago

F

folie

3 Posts

0

5748

July 30th, 2008 01:00

XPS 710 Steady amber light after CPU replacement

Dear Readers 

 

I have replaced, carefully following instructions, my E6700 with an E8500 processor on my XPS710 system. Unfortunately after hookingup the system and plugging in the power cable I immediately get a steady amber light on the 'on/off' button (not even touched it yet) and the fan starts to blow. That's it, nothing more......

Did I already fry to Motherboard or CPU without even putting it on?? Could there be another issue that is causing this?

 

Thanks for any support....

 

Regards,

Folie

  • contrvlr

    1359 Posts

    371

    0

    Posted July 30th, 2008 01:00

    Could have something to do with the fact that you've put a 1333 fsb cpu onto a board that only supports 1066 fsb.
  • Mark Tanner

    1 Rookie

    •

    80 Posts

    371

    0

    Posted July 30th, 2008 08:00

    He's right. An XPS 720 would support an E8500 with a new bios (05 or later) but a 700/710 won't. Newer processor support was most of the reason why people upgraded to the 720 motherboard.

     

    Your processor should still be fine, motherboard also but you'd better get that E6700 back in to verify the mobo.

     

    Mark

     

     

    Message Edited by Mark Tanner on 07-30-2008 04:11 AM
  • folie

    3 Posts

    371

    0

    Posted July 30th, 2008 09:00

     Thanks for the help. I will try to do that.

    Regards,

    Folie

  • folie

    3 Posts

    371

    0

    Posted July 30th, 2008 23:00

    Replaced the new E8500 with the old E6700 and it is working again..... Quite a waste. Thought the new CPU wouldn't have a problem withy a faster FSB and vice versa.... Thought wrong.

    Well, at least learned something.