
UNSOLVED
XPS 435MT - with 64Bit OS and currently it has 8Gb 8500 - Additional Crucial Memory 2 x 4Gb RAM Issues
Can you assist please - Crucial Have Advised I raise this issue with Dell but thought I'd see if anyone can help out before I go down that road:emotion-2:
I have a XPS 435MT - with 64Bit OS and currently it has 8Gb 8500 as shipped from Dell - however I use the PC for VmWare Test Imagesand as such really wanted to load up the XPS with some more RAM
I thought I'd pick up an extra 2 x 4gb RAM from Crucial and just replace two of the 1Gb already in there - however when I install this new RAM 2x 4Gb(1066Mhz) DDR3 I get bleeping and the XPS fails to boot.
If I remove all existing Memory and install the 2 x 4Gb RAM is boots up and is visiable under Computer Properties - so it seems the XPS will work with the new RAM -
I'm confused do I need to install RAM in groups of 3 - therefore should I be looking to get an additional 4Gb from Crucial ?
Obviously I want to use the exisiting memory as well - any ideas which slots I should put them into allow me to run both speeds
At present I have
2 x 2Gb 8500 (Existing) DDR3
4 x 1Gb 8500 (Exisiting) DDR3
2 x 4Gb 1066 (Recently Purchased Crucial) DDR3
If someone can explain the how is the best way to install the RAM into the 6 DIMM slots work to maximise DDR3 working and if anyone has had similair issue
Regards
Responses (6)
Solutions (0)
Dell 435MT - Upgrade to 12Gb RAM Not recongised Why ????
I have purchased 3 x 4Gb sticks to support the VmWare server lab I have running which includes several Server images in VmWare Workstation 6.5
Unfortunately when I install just the new 4Gb Sticks in slots numbered 1,2 & 3 using the Dell RAM install doc - I get the dreaded bleep and the PC won't fire up.
When I remove any 1 x 4Gb stick it fires up and when I run up CPU-Z I can see 8Gb - all 3 Sticks work in when installed as pair , so I know they are all good - and all purchased at same time in a triple pack from Crucial
I'm a little lost as it looks as though the motherboard will only recognise 8Gb no matter - any ideas how I can check/alter what the system recognised.
Any ideas welcome
Thanks
BTTB
I hope I dont have your problem as i just purchased a set of 6 hyperx 1333 2GB modules, however from what I read a BIOS update could be your problem. If you havent updated to the most recent update, it is possible it will not recognize 4GB modules in every slot. Also, you might want to verify that your putting the memory in the correct slot if you havent as of yet. 1,2,3 are not in order but are actually 1,4,2,5,3,6 which could be whats causing your issue. Just a suggestion to check out in the manual on upgrading the memory. I realize this thread is pretty old, but let us know if you get an update! Thanks
I found 4 GiB DIMMs that work, and now have 24 GiB in my 435MT.
Details at http://en.community.dell.com/support-forums/desktop/f/3514/p/19368276/19835904.aspx#19835904
Copterdoct
1 Message
511
1
Posted April 19th, 2011 03:00
installed several types before using black diamond pc3-1066 4GB mods and runs 24GB sweet, M-1066T-4096X2BD16 will get you 2X4 chips for around 78.00

fireberd
11 Legend
•
33399 Posts
•
112848 Points
511
0
Posted November 5th, 2010 10:00
First, we are users helping users on this forum, not Dell employees. If you are trying to contact Dell this is not the way to do it.
However, see THIS
<ADMIN NOTE: Broken link has been removed from this post by Dell>
from the Dell service manual on installing memory. It looks like you need 3 memory modules for each set.
I have 8GB installed in my Win 7 64 bit OS system. I use this system for my recording studio with Sonar software, which can be memory intensive. The most I've ever seen used was a little over 4GB.