UNSOLVED

skmerrow

updated

26 years ago

S

skmerrow

91 Posts

0

9905

September 18th, 2000 11:00

Which processor do I have?

I ordered a 933 but when I log on to the tech support web page it says my system is a 866. Better not be. Other than opening it up how do I tell?

This is a copy of that screen
Model: Dimension 4100
Processor: P3,CU,866/133,256K,SKT

System Service Tag: 2NMQ001
Express Service Code: 5782451329

System Ship Date: 8/21/00

What is SKT on the processor line?

Karen Merrow
  • blackjck

    98 Posts

    606

    0

    Posted September 18th, 2000 12:00

    your right karen my info reads as follows:
    Model: Dimension 4100
    Processor: P3,CU,933/133,256K,SKT
    and i have 512 mg of ram.

    so that means my system is a Pent III 933 and has 256 cashe the 133 stands for my bus speed. U definetaly have a 866 mhz processor.
  • blackjck

    98 Posts

    606

    0

    Posted September 18th, 2000 12:00

    Karen,
    I hate to be the bearer of bad news,but to me it looks like you have a Pent III 866 coppermine,256ram pc133, I dont know what the skt stands for. If you ordered a 933 someone made a boo boo......raise the roof..
  • skmerrow

    91 Posts

    606

    0

    Posted September 18th, 2000 12:00

    But I don't have 256 K of ram. I am positive of that.
  • skmerrow

    91 Posts

    606

    0

    Posted September 18th, 2000 12:00

    But my bios says I have a 933. Somebody screwed up somewhere.
  • blackjck

    98 Posts

    606

    0

    Posted September 18th, 2000 12:00

    If your bios says you have a 933 then thats what you most like have....the info thats put in with the system tag my of been human error. sorry for the scare.....I should of suggested you check the bios before making a judgment:)
  • JerryHH

    10 Posts

    606

    0

    Posted September 18th, 2000 17:00

    My guess is that you have a 933mhz and that the web-based system info is wrong. You can confirm this by running a program like Sisoft Sandra which wil give you detailed information about your configuration. You can download it free from several sites on the internet.

    If you're sure you keyed your service tag # correctly, then you probably should ask Dell to correct your system info sonce that's what they use to determine your configuration for troubleshooting purposes.
  • Fore_Par

    14 Posts

    606

    0

    Posted September 18th, 2000 22:00

    Karen:

    Try this intel program and it will tell you what you have....I had a similar problem on my support page.
    Let me know if this helps!

    http://support.intel.com/support/processors/tools/frequencyid/freqid.htm

    Jerrod
  • piper326

    15 Posts

    606

    0

    Posted September 18th, 2000 23:00

    Just a small note..

    when i got my system in april. i bought a PIII 700, but they had supply problems from intel. ( long story in it self). So they sent me a PIII 750.
    You can see what you have when the computer boots up.
    Just press "esc" when the dell screen comes up.
    it will show you what bios and processor etc.
    you probably already know this, but i am sure they sent you the 933 chip.

    have a good one
  • s_geist

    1 Rookie

    •

    5 Posts

    606

    0

    Posted September 19th, 2000 20:00

    The freqid program from Intel isn't web-based. It's simply available on the web.

    Intel wrote it specifically to identify processors to counteract re-labeling and other assorted processor-related frauds.