
UNSOLVED
What is the correct process to rebuild and reformat an internal hard drive?
I have an 8200 and need to rebuild my internal 40 gig hard drive.
The machine came with ME factory installed. I upgraded with the Dell provided XP upgrade, and was never able to get the HD reformatted to NTSF and keep it that way (still is formatted in FAT). As a result, I have to reformat the drive, install a full version of XP (not the upgrade).
I am not real experienced in this and need a step be step guide on the best process.
I have a Maxtor external hard drive with Retrospect, so I can back up my files, then move them back over to my internal C drive after the drive is rebuilt.
I have the following questions:
1. Is there a step by step guide offered by Dell on doing this?
2. Also, is there a Dell support line I can use so a live person can walk me through or trouble shoot problems?
3. Finally, will I have to manually re-install all my programs/applications or is there a way I can just back them up on my external and move them back over after my C drive is rebuilt?
Responses (5)
Solutions (0)
Denny Denham
2 Intern
•
18798 Posts
457
0
Posted April 22nd, 2005 15:00
Second place by three minutes. Rats!
- The Dell guide for reinstalling XP on your hard drive may be found HERE. In addition, you'll find Denny's guide invaluable by going HERE. Denny's guide has steps specific to performing a clean installation using an upgrade CD. You have no choice but to reinstall all of your applications when you reinstall Windows. However, by performing a full backup prior to the reinstallation, you should have all the user files you need once you're done.
Thanks for all the good advice (below). I read most of the links and have a much better idea on how to proceed. I will actually be installing a new internal 80 Gig hard drive (from Dell) before I proceed with my reformatting - installing Windows XP process. I will be installing a full, new Windows XP Home Edition with SP2. I have a couple questions:
1. I assume I can install XP on a "Non-Bootable" basis? I hope this is clear. At some point in the installation process you have a choice between "boot from drive" vs "non-bootable". I assume the new HD makes it so the "non-bootable" is the best choice.
2. I also assume that I do not have to delete or set up partitions/drives - this will be automatically done with the XP installation process on a new HD? On the other hand, maybe I want to set up a couple (one for the OS and apps, the other for files and data)?
3. I also assume that I do not have to "reformat" my HD to NTSF - this will be done automatically with the XP installation?
4. There is a lot of discussion about downloading and installing drives in the knowledge articles (e.g., modum, NIC cards, monitors, sound cards, etc.) from Dell and the blue CDs provided by Dell. I always thought that XP was able to deal with all this stuff automatically. Do you recommend just skipping over this drivers section and see what works, then going back on a targeted basis as needed?
5. Not to make things too complicated, but I will now have my original 40 Gig internal hard drive available (along with the 80 gig that I just purchased). The Dell sales rep said the 8200 does not have the ability to run multiple internal hard drives. If this is the case, OK (not the end of the world). It would be great if I could run both internal hard drives though - I could use the internal 40 gig for the OS and my apps and the 80 gig for all my files/data. I also have an external 120 gig back up drive so my data management work flow and archiving would be pretty slick. My question...can the 8200 handle two internal HD? If yes, how do I configure (Master, Slave, Cable Select, etc.)?
Thanks again for your time.

Denny Denham
2 Intern
•
18798 Posts
457
0
Posted April 22nd, 2005 15:00
Detailed instructions are here and in the included links. You can call Dell tech support for assistance in the process if you require it, but it is quite straightforward. Please note that you can do a clean install of Windows XP with an upgrade CD. You will be prompted to insert the ME CD early in the process to verify that you are doing a legitimate upgrade, then the XP installation will proceed. As long as you still have your ME CD you don't need a standalone copy of XP.
You will have to reinstall your applications. They cannot be simply copied to your external drive then copied back after XP is installed.