UNSOLVED

GeorgeZ

updated

23 years ago

G

GeorgeZ

15 Posts

0

14423

March 28th, 2004 20:00

Visioneer Scanner & Camera Software Conflicts

I recently bought a Visioneer One Touch 9320 USB Scanner and a Visioneer MX230 digital camera...I loaded the software for both peripherals and encountered a conflict in the software loading between the two units...I have installed and uninstalled the software in different order trying to find a possible fix to the problem..

The scenario I am encountering is the following: Upon loading the scanner software it runs OK and the camera software runs OK by themselves with the other software left uninstalled...when both software and drivers are loaded for the two peripherals the camera software seems to load but the One-Touch software will not load...the result also leads to Windows Explorer window loading up at startup with the directory that contains the MX230 camera files in it...( Program Files\MX230\*.* etc.)...I can close the window but that does nothing to allow the scanner software to run...I have disabled the One-Touch scanner software in the startup and the WE window does not pop up...of course the scanner definitely does not load when I do this, just proves my point that there is conflict between the two peripheral's software...

Does any one have any suggestions of a work around I can use without having to uninstall the camera software everytime I want use the scanner?  I have yet to contact Visioneer and wanted to get someone else's input before I call the manufacturer in case they have run into the same situation...

I would appreciate any info anyone could possibly give me for this particular problem..

Thanks for he help..

George

Dimension 8300
Intel Pentiun 4 CPU @ 3.2 GHz
1024MB DDR SDRAM @ 400 MHz
128 MB DDR ATI RADEON 9800 PRO
250GB Serial ATA HDD (7200 RPM)
Intel Pro 100M Integrated PCI NIC Card
Conexant D850 56K V.9x DFVc Modem

OS: Windows XP Professional

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    352

    0

    Posted March 28th, 2004 21:00

    With Windows XP, you should not need to install any drivers for the camera.  Windows XP should automatically detect it and "install" it.  Depending on how XP compatible the camera is, you will either get the Windows Scanner and Camera Wizard that will come up when you connect the camera and allow you to transfer pictures to the hard drive.  If it's not 100% XP compatible (does not meet the Windows XP "Windows Image Acquisiton" compliant) then you will have to use the Windows Explorer to access the camera as a drive letter and transfer files through the Windows Explorer.  If there is any photo editing software that came with the unit you can install that and there should be no compatibility issues with the scanner software. 

    As far as the scanner, you should install the scanner software and then when the installation program tells you, physically connect the scanner and let Windows install it.  Again, there should be no conflict with the Camera since there are no drivers required/installed for Windows XP.

    If you are installing drivers, do not, as they are most likely for Windows 98/Me/2000, not Windows XP.

     

     

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • GeorgeZ

    15 Posts

    352

    0

    Posted March 29th, 2004 01:00

    Fireberd:

    Thanks for the information about the camera, I will try it out the way you describe and see if XP detects it...the literature on the MX 230 has the Windows logo on it and reads that it is designed for XP.....so it should work OK...

     

    Another issue.... I have a NEC DVD +RW ND 2100AD writeable drive...is the backup utility in XP good enough to use...I have been getting emails from Sonic, (the software that Dell loaded on my computer), encouraging me to purchase a "Backup PC" program...I was wondering if it it was worth the investment or should I try the backup utility that came with XP?...what is your opinion...

    Thanks,

    George

  • 352

    0

    Posted March 29th, 2004 05:00

    Hi George,

                   The XP software for the 8900 USB also has compatibility issue with XP......the one touch button software causes erors......But the scannner still works...but must be accessed from within my photo application...or scanned into the scanner wizard software/ then sent to application to use.  This doesn't help you fix your issue, but does explain it is more an issue with Visioneer's software.....Hopefully you'll be able to select the scanner source from with -in the application you are trying to scan to..ie- a photo program/email program, etc.

                                      good luck,

                                                                MW

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    352

    0

    Posted March 29th, 2004 09:00

    George, the backup program that comes with XP will not write to a CD, only to a floppy or possibly a zip drive. 

    If you want a backup program, you will have to buy one.  I haven't seen or heard anything about the Sonic program. 

    In reality, unless you want to "ghost" (make an exact copy) of the hard drive, you don't need a backup program.  You have all the restore CD's from Dell and if you have bought any additional software you also have those CD's.  All you really need to backup is your user data such as WordProcessing files, pictures, downloaded programs, e-mail account setup, address book (and any e-mails you want to save/archive), your Internet Explorer favorites, etc.  The e-mail account and address book can be exported as a file and the same with the Internet Explorer.    I backup all my user data to a DVD (I have a DVD burner) periodically, as needed.  I use a DVD +R disc as I have a lot of MS Office user data, pictures and music that I want backed up.  DVD's are relatively expensive compared to a CD-R but it's cheap considering all the data I would lose if I had a hard drive crash.

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application