
UNSOLVED
usb mouse/keyboard recognition on Optiplex 745
I've just recieved a batchof Optiplex 745 and am having terrible trouble getting them to recognize USB mice or keyboards after being installed with XP (they shipped with Vista, but we're not using it yet). I've tried to install the mice and keyboards that they shipped with and several other designs, too, but they often fail to recognize automatically, or they run for about 5 seconds and then stop and they are yellowed out in the device manager as being faulty/improperly installed.
Strangely, the USb at the front seem to recognize better than those at the back.
Does anybody have a similar problem, or some hints as to how I minimise my problems.
Seriously, it adds an extra 10 minutes onto the set up of each PC, having to keep fiddling with the mice etc to get them working.
Responses (44)
Solutions (0)
- KnaufIT,
The first thing to check would be the version of the BIOS on the systems, check to see if they are running version 2.3.1. If they are not, then you would want to flash them to that version, as it has a specific fix for USB issues.
You may also try resetting the CMOS. Even though the problem is in Windows, the BIOS can still affect the way the operating system loads the default drivers.
Though you found the front USB ports to work better, in theory, the two upper ports on the back are the ones for the use of the keyboard and mouse. jperret1029
10 Posts
3012
0
Posted September 11th, 2007 18:00
I've got the same problem. We buy 745s as an OEM and include them as part of our product. We are having keyboard and mouse recognition problems left and right.DELL, how about a solution ASAP!- jperret1029,
Welcome to the Dell Community Forums.
Have you tried the steps mentioned above, upgrading the BIOS, resetting the CMOS, and updating the chipset drivers?
Did the systems come with Vista and you rolled them back to Windows XP?
How many systems are having this issue?
Please let me know the above, so I can try and help you further. jperret1029
10 Posts
3012
0
Posted September 12th, 2007 11:00
BIOS is at 2.3.1We purchase the systems with Win XP Pro already installed.We are buying 20+ systems a month. I hope I don't have to check or update the chipset version on brand new PCs.We load our application software and test the PCs with our hardware before shipping to our customers. We don't have any problems with initial setup. We rebox the systems and ship.Problems occur once the PCs are set up on site. Installers may or may not use the same USB ports we used at initial setup. There are 1 or 2 other USB peripherals in our system in addition to keyboard and mouse.We are just starting to see the problems in the field. We are having problems with about a quarter of the systems (about 5 in the last month).Thanks for your help- jperret1029,
Well I am full of more questions than answers.
Do the keyboards work in the BIOS with no problems?
Do the keyboard and mouse work if you disconnect the other USB devices?
Check to make sure the keyboard and mouse are in the two upper rear ports, those are the ports that are active from when the system first boots up and are the suggested ports for those devices. There could be a number of things going on here, if the problem is only in Windows, then there may be a driver conflict. Updating to the latest drivers for the other USB devices might help.
Message Edited by DELL-Elsbeth on 09-12-2007 08:10 AM jperret1029
10 Posts
663
0
Posted September 12th, 2007 16:00
Keyboard works with BIOS.On the system we had yeaterday, disconnecting all of the other USB peripherals made no difference. With mouse and KB only, still had problems.All USB ports are not created equal? There is no system documentation specifying that certain ports are KB/mouse only.Are the 'upper rear ports' the ones in line with the RJ45?Windows seems to have a problem identifying the KB/mouse and /or the correct drivers to use. The new hardware wizard starts up when either is plugged in. It does not seem to be able to find the correct drivers and prompts for a CD. These are brand new systems. All the KB/mouse drivers should be somewhere on the HD already. The final message is that the installation had problems and that the device maight not work correctly - they got that right.

Elsbeth.
2 Intern
•
614 Posts
3013
1
Posted September 4th, 2007 12:00
Are you including the BIOS update?
You would want to check my other suggestions as well.