UNSOLVED

lesbesser

updated

25 years ago

L

lesbesser

9 Posts

0

9694

February 26th, 2002 03:00

USB - can it handle 3 connections?

I have a Dimension 8200 with 4 USB ports (2 back, 2 front).
I want to connect a label printer (Dymo 300), a handheld
organizer (HP Journada 568), and a Memorex Compactflash-
Smartmedia card reader. I have had lots of troble and ususally one does not function properly.
I did some cleaup in the Safe Mode, removing the drivers
and letting the Wizzard re-install them. No help. The
component support people point their fingers at Dell, saying
that the USB cannot support more than 2 devices reliably.

Thanks for any advice.

Les Besser
lesbesser@cs.com



  • Ron B

    639 Posts

    289

    0

    Posted February 26th, 2002 04:00

    Hello-When you use USB devices, they draw power from the computer. You may have exceeded the limit for the computer's ability to supply this power. A self-powered USB hub may be the solution to your problems.

  • TruthJustice

    121 Posts

    289

    0

    Posted February 26th, 2002 14:00

    lesbesser,

    The 8200 has plenty of power to handle 3 USB devices. I have 6 on my 8200 using the two USB's on the back for Keyboard and Mouse, the two on the front for Scanner and Printer, and I have 2 more on the keyboard which I use for Camera and PDA. The only problem I've had is when trying to go into BIOS. I have to unplug the Camera and the PDA from the keyboard or it hangs.

  • Billkt

    42 Posts

    289

    0

    Posted February 26th, 2002 14:00

    I have 5 USB devices attached. All you need is a powered USB hub. I have a Belkin, but I am sure most any brand will work OK. Just be sure it is a powered unit.

    Dimension 8200
    1.7 GHz
    256 MB RDRAM
    64MB NVIDA GeForce3 Ti Video
    16X DVD Drive
    24x10x40 CD-RW
    40 GB 7200 RPM Hard Drive
    19"Dell M991 Monitor
    Logitech Wireless Keyboard
    Logitech Optical Wireless Mouse
    Windows XP Home Edition
    Netscape 6.2
    Philips Acoustic Edge Sound
    Klipsch Pro Media 4.1 speakers
    3Com Eithernet Card
    Cable Modem Internet Access
    Hewlett Packard 990C Printer
    Hewlett Packard 5200C Scanner
  • lesbesser

    9 Posts

    289

    0

    Posted February 27th, 2002 04:00

    Thanks Bill, I will get a powered hub.
    Regards,
    Les

  • lesbesser

    9 Posts

    289

    0

    Posted February 27th, 2002 04:00

    Thanks very much -- I will work on the drivers.
    Regards,
    Les

  • lesbesser

    9 Posts

    289

    0

    Posted February 27th, 2002 04:00

    Thanks Ron someone else suggested the same. I will get a self-powered hub.
    Regards,
    Les